TITLE: HP Compaq Blade Workstation Client USB Key Image Recovery

VERSION: 09.61 Rev. A
DESCRIPTION:
This package contains the tools and image needed to restore or replace the 
operating system image on the HP Compaq Blade Workstation Client running the HP 
Blade Workstation Client Embedded (OEM) Operating System. 

NOTE: The image contained in this package must be deployed on a 256-MB drive 
key (or larger) using the dskimg32 tool included in this package.

For information about the HP Blade Workstation Client series and the features 
provided by Embedded Operating System (OS) Version 9.61, see the document 
titled "HP Blade Workstation Client series - Embedded OS Version 9.xx," which 
is available from any of the following websites:

www.hp.com/support/bwclient_manuals
www.hp.com/support/dc72_manuals
www.hp.com/support/dc73_manuals 

PURPOSE: Routine
SOFTPAQ NUMBER: SP38651
SUPERSEDES: None
EFFECTIVE DATE: March 4, 2008
CATEGORY: Software
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

HARDWARE PRODUCT MODEL(S):
HP Compaq Blade Workstation Client: All Models
HP dc72 Blade Workstation Client: All Models
HP dc73 Blade Workstation Client: All Models

SOFTWARE PRODUCT(S):
None

OPERATING SYSTEM(S): 
HP Blade Workstation Client Embedded OS

LANGUAGE(S): 
Global

ENHANCEMENTS: 
-Updates the HP Remote Graphics Software (RGS) Receiver to version 5.1.3, 
which: 
* Improves RGS performance in high-latency environments. 
* Allows dynamic remapping of USB devices. 
* Enables sender/receiver screen resolution matching.

-Updates HP Session Allocation Manager (SAM) to version 2.2, which: 
* Adds the ability to save a client configuration as a Monitor Layout ID. 
* Simplifies the user's interface for remapping USB devices. 
* Adds fine-grained control over the user and global settings and locks. 
* Recognizes the NVIDIA GeForce 8400GS Card. 
* Updates the Intel network driver for better Gigabit negotiation with certain 
switches. 
* Enables the administrator to select RGS border status through webmin 
settings. 
* Adds a SAM configuration file editor in webmin. 
* Handles all hostnames in Client Aggregation.

PREREQUISITES: 
- 256-MB (or larger) drive key is required for image deployment.

INSTALLATION INSTRUCTIONS: 
1. Download the SoftPaq .EXE file to a directory on your hard drive. 

2. Execute the downloaded file to extract the files.

NOTE: The dskimg32.exe utility contained in this package is only to be used in 
the deployment of this image. 


To use this SoftPaq, complete the following steps:

1. With the appropriate USB drive key plugged in, open a command window and run 
dskimg32.exe to obtain the drive key ID (only one drive key should be plugged 
in when running this program). HP branded keys are recommended in order to 
guarantee that the image will be copied correctly.
Example: dskimg32.exe
Output will indicate that the USB drive key is mapped to HD*.

2. Run dskimg32.exe client-09.xx.img.
Example: dskimg32.exe client-09.xx.img HD3 (where HD3 is the device ID for your 
drive key).

NOTE: Be sure to use the correct drive key device ID, because all data on the 
device will be replaced by the client image.

3. Start (boot) the HP Compaq Blade Workstation Client from the USB drive key 
and follow the on-screen instructions.


Copyright (c) 2008 Hewlett-Packard Development Company, L.P.