TITLE: HP Installer Kit for Linux - HP Driver CD for Red Hat Enterprise Linux 
5.1 Desktop

VERSION: Update 1 Rev. A
DESCRIPTION:
This package contains the HP Installer Kit for Linux - HP Driver CD ISO image 
to enable the Red Hat Enterprise Linux Workstation 5.1 Desktop Box Set for the 
supported workstation models. 

PURPOSE: Routine
SOFTPAQ NUMBER: SP38083
SUPERSEDES: None
EFFECTIVE DATE: December 3, 2007
CATEGORY: Software
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

HARDWARE PRODUCT MODEL(S):
HP xw4400 Workstation: All Models
HP xw4550 Workstation: All Models
HP xw4600 Workstation: All Models
HP xw6400 Workstation: All Models
HP xw6600 Workstation: All Models
HP xw8400 Workstation: All Models
HP xw8600 Workstation: All Models
HP xw9400 Workstation: All Models

SOFTWARE PRODUCT(S):
None

OPERATING SYSTEM(S): 
Red Hat Enterprise Linux 5 Desktop (x86)
Red Hat Enterprise Linux 5 Desktop (x86_64)

LANGUAGE(S): 
Global

ENHANCEMENTS: 
- Provides the HP drivers for the Red Hat Enterprise Linux 5 Desktop Operating 
System.

PREREQUISITES: 
- A retail Red Hat Enterprise Linux 5 Desktop Box Set must be purchased 
separately and must be available when installing this SoftPaq.

INSTALLATION INSTRUCTIONS: 
1. Download the .tgz file to your local hard drive. Unpack the .tgz file with 
'tar -xvzf . An .iso file is unpacked.

2. Burn the .iso file to CD-R bootable media. For example, on a Linux 
Workstation use the 'cdrecord' utility:
'cdrecord -v -eject speed=16 dev=2,0,0 filename.iso'
where dev= is the device address for the CD-ROM burner that comes from 
'cdrecord --scanbus'.

3. Insert disc 1 from your Red Hat Enterprise Linux Workstation (WS) box set 
and boot the HP Workstation.

4. When prompted at the end of the installation for additional software, insert 
the Driver CD that was created from the .iso file in this package.

5. Continue following prompts until the operating system is sucessfully 
installed.


Copyright (c) 2007 Hewlett-Packard Development Company, L.P.