SOFTPAQ NUMBER: SP3653 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq SpeedPaq ISDN Driver Upgrade VERSION: 1.10 Rev A LANGUAGE: US English CATEGORY: Drivers/Misc PRODUCTS AFFECTED: Compaq computers with SpeedPaq ISDN NOTE: Minimum requirements to support a SpeedPaq ISDN adapter are - 486 or higher microprocessor - Windows 95 - An available ISA slot - 8M byte of SRAM OPERATING SYSTEM: Microsoft Windows 95 SYSTEM CONFIGURATION: Compaq SpeedPaq ISDN adapter installed PREREQUISITE: Before this new version of Compaq SpeedPaq ISDN drivers can be installed, any previous version of the drivers must be removed from the system. Refer to the Compaq SpeedPaq ISDN User's Manual for instructions on removing drivers from the system. EFFECTIVE DATE: 17 June 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: N/A DESCRIPTION: Creates one or two diskettes containing updated Windows 95 drivers for the Compaq SpeedPaq ISDN adapter. HOW TO USE: 1. Obtain two formatted 1.44-MB diskettes. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert the formatted diskette(s) in a drive to create the diskette(s). 4. After the diskette(s) have been created, you may delete the SoftPaq file downloaded in step 2. 5. Verify that any previous drivers for Compaq SpeedPaq ISDN have been removed (Refer to the Compaq SpeedPaq ISDN User's Manual). 6. Reboot the system. At the message, "New Hardware Found", insert the first diskette that was created into the diskette drive. 7. To complete the installation of the new driver, refer to the Compaq SpeedPaq ISDN User's Manual for details. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.