TITLE: HP Compaq Blade Workstation Client USB Key Image Recovery

VERSION: 08.41-4.2.1 Rev. A
DESCRIPTION:
This package contains the tools and image needed to restore or replace the 
operating system image on the HP Compaq Blade Workstation Client running the HP 
Blade Workstation Client Embedded (OEM) Operating System. 

NOTE: The image contained in this package must be deployed on a 256-MB drive 
key (or larger) using the dskimg32 tool included in this package. 

PURPOSE: Routine
SOFTPAQ NUMBER: SP35381
SUPERSEDES: None
EFFECTIVE DATE: April 5, 2007
CATEGORY: Software
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

HARDWARE PRODUCT MODEL(S):
HP Compaq Blade Workstation Client: All Models
HP dc72 Blade Workstation Client: All Models

SOFTWARE PRODUCT(S):
None

OPERATING SYSTEM(S): 
HP Blade Workstation Client Embedded OS

LANGUAGE(S): 
Global

ENHANCEMENTS: 
- Adds support for Japanese, Latin American Spanish, and Dutch keyboards.
- Integrates Active Directory in Webmin.
- Makes Settings files accessible from Webmin.
- Integrates Altiris DS 6.8 SP1 support and ADLagent.
- Adds an option that enables the host to pass the hostname to the Dynamic Host 
Configuration Protocol (DHCP) server.
- Adds an option for forcing analog monitor output when mixing Analog/DVI.
- Adds pseudo-random hostname generation.
- Modifies the partition scheme and bootloader to support Altiris.
- Adds writable file system check and cleanup during boot. 
- Loads USB-HID after usb-remote.

PREREQUISITES: 
- 256-MB (or larger) drive key is required for image deployment.

INSTALLATION INSTRUCTIONS: 
1. Download the SoftPaq .EXE file to a directory on your hard drive. 

2. Execute the downloaded file to extract the files.

NOTE: The utility contained in this SoftPaq is only to be used in the 
deployment of this factory image.

3. With the appropriate USB drive key plugged in, open a command window and run 
dskimg32.exe to obtain the drive key ID (only one drive key should be plugged 
in when running this program).

4. Run dskimg32.exe client-08.41-4.2.1.img.
EXAMPLE: dskimg32.exe client-08.41-4.2.1.img HD3 (where HD3 is the device ID).

NOTE: Be sure to use the correct disk storage device ID, because all data on 
the device will be replaced by the client image.

5. Start (boot) the HP Compaq Blade Workstation Client from the USB drive key 
and follow the on-screen instructions.


Copyright (c) 2007 Hewlett-Packard Development Company, L.P.