TITLE:
ROMPaq for HP Notebook System BIOS (68YOP) – FreeDOS Bootable Media
VERSION:
F.04
DESCRIPTION:
This package enables the creation of a bootable diskette, CD, or USB Key that can be used to locally restore or upgrade the System BIOS in the listed notebook models with a 68YOP Family ROM. NOTE: Insert only the USB drive that will be used to format and create a bootable BIOS upgrade USB drive. Remove all other USB drives and flash drives from the notebook. NOTE: To determine the ROM family and ROM date, press 10 on the target notebook during startup to run the Setup Utility, and then view File/System Information.


PURPOSE:
Routine
SOFTPAQ NUMBER:
sp33351
SUPERSEDES:
sp32677
EFFECTIVE DATE:
09 June 2006
CATEGORY:
BIOS
SSM SUPPORTED:
No
PRODUCT TYPE(S):
Notebooks

HARDWARE
PRODUCT MODEL(S):
HP Compaq nc2400 Notebook PC
OPERATING SYSTEM(S):
Microsoft Windows 2000
Microsoft Windows XP Home Edition (32-bit)
Microsoft Windows XP Professional (32-bit)
LANGUAGE(S):
Global

ENHANCEMENT(S):
- Updates microcode to support new factory-installed processors.
FIXES:
- Fixes issue where a notebook Powers On automatically when
the following conditions are met:

* The notebook is connected to AC power and has the main battery
removed.
* The notebook is Powered On and the AC power is removed during the
startup (boot) process.
* AC power is reapplied to the notebook, at which point the notebook
automatically Powers On.
PREREQUISITES:
None

HOW TO USE:
1. Download the SoftPaq .EXE file to a directory on your hard drive.

NOTE: This SoftPaq enables the creation of a bootable diskette, CD, or
USB Key. Be sure to have the selected media available before beginning
Step 2. If using a USB key, ensure that no USB keys or flash drives are
attached to the notebook until prompted, and then only insert the USB
key to be used for the BIOS update.

2. Execute the downloaded file and follow the on-screen instructions. When
prompted, insert the appropriate media into the notebook (or attach to
the notebook) and follow the on-screen instructions to create the
bootable media.

NOTE: After the selected bootable media has been created, the SoftPaq
.EXE file downloaded in Step 2 can be deleted, if desired.

3. Power Off the notebook.

IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THE
PROCEDURE IN STEP 4!

4. Make sure the newly created bootable media is still attached or in the
appropriate drive, and Power On the notebook. Follow the on-screen
instructions to upgrade the System BIOS.


Copyright (c) 2006 Hewlett-Packard Development Company, L.P.