SOFTPAQ NUMBER: SP32830 PART NUMBER: N/A FILE NAME: SP32830.EXE TITLE: System ROMPaq Firmware Upgrade Diskette for HP ProLiant DL360 G4 Servers VERSION: 2006.02.14A LANGUAGE: English CATEGORY: ROMPaqs DIVISIONS: Systems PRODUCTS AFFECTED: HP ProLiant DL360 G4 Servers OPERATING SYSTEM: All SYSTEM CONFIGURATION: N/A PREREQUISITE: N/A EFFECTIVE Date: 5/10/2006 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: SP31196 DESCRIPTION: This release provides updated system ROM images for the latest maintenance releases of HP ProLiant DL360 G4 Servers. New Features - HP ProLiant DL360 G4 system ROM P52 (02/14/2006) ================================================= None. Problems Fixed - HP ProLiant DL360 G4 system ROM P52 (02/14/2006) ================================================= 1) Resolved an issue that may result in a server hang during POST when certain storage controllers are installed and more than 7 logical drive volumes are configured. This issue may occur on certain controllers, whether embedded or expansion card based, if 8 or more blank drives are attached to the controller. This issue will occur with, but is not limited to, the HP 8 Port SAS/SATA controller, HP Single-Channel U320 SCSI HBA G2 Controller, and HP 64-Bit/133 MHz PCI-X Dual-Channel U320 Controller. 2) Resolved an issue where the System ROM could hang at the end of POST when attempting to boot from a USB CDROM. 3) Resolved potential issue with Online Spare Advanced Memory Protection feature which may result when failed DIMMs are installed as the spare memory. 4) Added support for iSCSI adapters to be configured as the boot controller in the ROM-Based Setup Utility (RBSU). Certain iSCSI adapters previously would not show up in the boot controller menu in RBSU. 5) Resolved an issue where system fan information is not displayed in Systems Insight Manager (SIM). Known Problems - HP ProLiant DL360 G4 system ROM P52 (02/14/2006) ================================================= None. HOW TO USE: 1. Obtain a formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on a system running Microsoft Windows 2000, Microsoft Windows Server 2003, or Microsoft Windows XP and change to that directory. The file that is downloaded is SP32830.EXE. 3. From that drive and directory, execute the downloaded SoftPaq file: SPxxxxx [ENTER] You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create diskette. 4. After the diskette is created, you may delete the downloaded file if you wish. 5. Insert this diskette into the diskette drive of the system to be updated. Copyright 2006, Hewlett-Packard Company. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies