TITLE: HP iPAQ rx1900 Pocket PC Series ActiveSync Mode Switch VERSION: 1.1 DESCRIPTION: This package contains the ActiveSync Mode Switch utility for the listed handheld models and operating systems. The ActiveSync Mode Switch utility enables users to change the ActiveSync connection type between the HP iPAQ Pocket PC and the PC. For example, if the PC is having problems with an ActiveSync or virtual private network (VPN) tunnel connection, try switching modes. PURPOSE: Recommended SOFTPAQ NUMBER: sp32559 SUPERSEDES: None EFFECTIVE DATE: 4 May 2006 CATEGORY: Utility - Tools SSM SUPPORTED: No PRODUCT TYPE(S): Handhelds HARDWARE PRODUCT MODEL(S): HP iPAQ rx1950 Pocket PC HP iPAQ rx1955 Pocket PC OPERATING SYSTEM(S): Microsoft Windows Mobile 5.0 LANGUAGE(S): Brazilian Portuguese ENHANCEMENTS: - Provides the ability to change the ActiveSync connection type from Serial Sync Mode or Remote Network Driver Interface Specification (RNDIS) Sync Mode. PREREQUISITES: - Requires ROM version 1.00 or 1.01. HOW TO USE: 1. Download the SoftPaq .EXE file to a directory on your hard drive. 2. Establish an ActiveSync connection between the iPAQ Pocket PC and the host PC. 3. Execute the downloaded file and follow the on-screen instructions. 4. To access the utility on the iPAQ Pocket PC, tap Start, then tap Settings, then tap the Connections tab, and then tap the ActiveSync Mode icon. INSTALLATION NOTES: IMPORTANT: Please observe the following restrictions: - Do not attempt to Power Off or restart the handheld while the update is in progress. - Perform this update with AC power attached to the handheld. - If the ROM is reflashed on the handheld after installing this update, this update must be reinstalled to restore this utility. Copyright (c) 2006 Hewlett-Packard Development Company, L.P.