TITLE: HP Installer Kit for Linux-Red Hat Driver Disk for Red Hat Enterprise 
Linux 3 U2

VERSION: Update 2 Rev. A
DESCRIPTION:
This package contains the HP Installer Kit for Linux - Red Hat Linux CD ISO 
image, as well as the .RPM file needed to enable the TG3 LAN for the listed 
workstation models running Red Hat Linux Enterprise Linux 3 Update 2 (U2). 

PURPOSE: Routine
SOFTPAQ NUMBER: SP32860
SUPERSEDES: None
EFFECTIVE DATE: April 26, 2006
CATEGORY: Software
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

HARDWARE PRODUCT MODEL(S):
HP xw4200 Workstation: All Models
HP xw6200 Workstation: All Models
HP xw8200 Workstation: All Models

SOFTWARE PRODUCT(S):
None

OPERATING SYSTEM(S): 
Red Hat Enterprise Linux 3 (AMD64/EM64T)
Red Hat Enterprise Linux 3 (x86)

LANGUAGE(S): 
Global

ENHANCEMENTS: 
N/A

PREREQUISITES: 
- A retail Red Hat Enterprise Linux Workstation 3 Update 2 box set must be 
purchased separately and must be available when installing this SoftPaq.

HOW TO USE: 
1. Download the .tgz file to your local hard drive. Unpack the .tgz file with 
'tar -xvzf . An .iso and an .rpm component are unpacked.

2. To install the .rpm, use 'rpm -ivh .rpm'.

3. To use the .iso, burn the .iso file to CD+R bootable media. For example, on 
a Linux Workstation use the 'cdrecord' utility: 'cdrecord -v -eject speed=16 
dev=2,0,0 filename.iso' where dev= is the device address for the CD-ROM burner 
that comes from 'cdrecord --scanbus'.

3. Insert disc 1 from your Red Hat Enterprise Linux Workstation (WS) 3 Update 2 
box set. At the installer prompt type 'linux dd'. 

4. On the next screen, select the CD-ROM drive that you are using. Insert the 
Red Hat TG3 Driver Disk you created into the selected CD-ROM drive.

5. Continue following prompts until the operating system is sucessfully 
installed.


Copyright (c) 2006 Hewlett-Packard Development Company, L.P.