SOFTPAQ NUMBER:  SP31929
PART NUMBER:  N/A
FILE NAME:  SP31929.EXE
TITLE:  Firmware Upgrade Diskette for HP ProLiant
        DL145 G2 Lights-Out 100i Remote Management.

VERSION:  1.22

LANGUAGE:  English

CATEGORY:  Firmware - Management

DIVISIONS:  Systems

PRODUCTS AFFECTED:  HP ProLiant DL145 G2 Servers
                    and HP ProLiant DL145 G2 Lights-Out 100i firmware

OPERATING SYSTEM:  ALL

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  N/A

EFFECTIVE DATE:  December 23, 2005

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 2.X

SUPERSEDES:  N/A

DESCRIPTION:   This release provides updated firmware images
               for the latest releases of HP ProLiant DL145 G2
               Lights-Out 100i Remote Management.


Important Note:

       IMPORTANT: This firmware upgrade is not compatible with XC System Software! 
            Please continue to use the 1.03 firmware with XC implentations
            until further notice. 	
      
       IMPORTANT: After upgrading to the ProLiant DL145 G2 BMC Firmware v1.22 the BMC 
            may not be recognized during POST when connecting the server to 
            AC power and immediately powering on.  Upgrading the DL145 G2 
            system ROM to version 2.13 or later will prevent this issue.

      NOTE: Secure Socket Layer, Secure Shell and virtual floppy enhancements 
            are available as LO100i technology previews with this firmware release. 
            This allows customers to evaluate and use these features at 
            no extra charge for an unlimited timeframe on ProLiant DL145 G2 servers.


New Features -


        ProLiant DL145 G2 Lights-Out 100i Ver. 1.22
        ===========================================


	   None.


Problems Fixed -


        ProLiant DL145 G2 Lights-Out 100i Ver. 1.22
        ===========================================

           
 	1. Resolved an issue where the serial com port would hang after 
 	   powering down the server and then exiting the BMC session.
 	              
 	2. Resolved an issue where the BMC would become unresponsive 
 	   when using the SMASH CLP load command to flash new firmware 
 	   and the TFTP server returned an error of "file not found".

   	3. Resolved an issue where the DHCP status shown by the CLP 
   	   was sometimes incorrect.

	4. Removed the reset verb from the BMC CLP target directories.
	            
	5. Changed the BMC CLP command prompt to /./->
	              
	6. Updated the BMC firmware for the latest SMSC chip revision.
	 
	7. Resolved an issue where system would not correctly PXE boot 
	   when the BMC interface was set to Shared.
		
			
Known Problems -

	1. If the user tries to remotely establish a remote console EMS 
	   connection with a server running Windows 2003 SP1, the session will 
	   disconnect the first time this is attempted.   Subsequent attempts 
	   to establish and log in to EMS will work.  Will be fixed in 
	   an upcoming maintenance release.






HOW TO USE:

1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that directory.
The file that is downloaded is SP31929.EXE.

3.  From that drive and directory, execute the SoftPaq file:
SP31929 [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to
create diskette.

4.  After the diskette is created, you may delete the downloaded file
SP31929.EXE if you wish.

Copyright 2005, Hewlett-Packard Company.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies