SOFTPAQ NUMBER:  SP31870
PART NUMBER: N/A
FILE NAME:  SP31870.EXE
TITLE:  System ROMPaq Firmware Upgrade Diskette for HP ProLiant DL360 G4p Servers


VERSION:  4.04A
LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Systems

PRODUCTS AFFECTED:  HP ProLiant DL360 G4p Servers

OPERATING SYSTEM:  All

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  N/A

EFFECTIVE Date:  12/19/05

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 2.X

SUPERSEDES:  sp31197

DESCRIPTION:   This release provides updated system ROM images
for the latest maintenance releases of HP ProLiant DL360 G4p Servers.






New Features -


        HP ProLiant DL360 G4p system ROM P54 (11/11/2005)
        =================================================
	
		1) Added support for 64-bit Dual-Core Intel Xeon processors.




Problems Fixed -


        HP ProLiant DL360 G4p system ROM P54 (11/11/2005)
        =================================================
	
		1) Resolved an issue that may result in a server hang during POST
		   when certain storage controllers are installed and more than 7
		   logical drive volumes are configured.  This issue may occur on
		   certain controllers, whether embedded or expansion card based,
		   if 8 or more blank drives are attached to the controller.  This
		   issue will occur with, but is not limited to, the HP 8 Port
		   SAS/SATA controller, HP Single-Channel U320 SCSI HBA G2 Controller,
		   and HP 64-Bit/133 MHz PCI-X Dual-Channel U320 Controller.
		
		2) Added support for iSCSI adapters to be configured as the 
		   boot controller in the ROM-Based Setup Utility (RBSU).  
		   Certain iSCSI adapters previously would not show up in 
		   the boot controller menu in RBSU.




Known Problems -


        HP ProLiant DL360 G4p system ROM P54 (11/11/2005)
        =================================================

		None.               






HOW TO USE:


1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that directory.
The file that is downloaded is SP31870.EXE.


3.  From that drive and directory, execute the SoftPaq file:
SP31870.exe [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to
create diskette.


4.  After the diskette is created, you may delete the downloaded file
SP31870.EXE if you wish.


Copyright 2005, Hewlett-Packard Company.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies