SOFTPAQ NUMBER:  SP31861
PART NUMBER:  N/A
FILE NAME:  SP31861.EXE
TITLE:  Single Point Solution System ROMPaq Firmware Upgrade Diskette for 
HP ProLiant ML570 G3 Servers.

VERSION:  12/05/2005

LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  systems

PRODUCTS AFFECTED:  
HP ProLiant ML570 G3 Servers.

OPERATING SYSTEM:  ALL

SYSTEM CONFIGURATION:  N/A

PREREQUISITE:  N/A

EFFECTIVE Date:  12/9/05


ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION: 2.X

SUPERSEDES:  N/A

DESCRIPTION:   This release provides a Single Point Solution 
User ROMPaq diskette for the 
HP ProLiant ML570 G3 Servers.



New Features -


        HP ProLiant ML570 G3 system ROM P37 (12/05/2005)
        =================================================

		None.



Problems Fixed -


        HP ProLiant ML570 G3 system ROM P37 (12/05/2005)
        =================================================

		   Resolved issue where a lock-up may occur in the following conditions:
		
			- Power Regulator HP Dynamic Power Savings Mode or Power 
			  Regulator HP Static Low Power Mode are enabled.
			
			- iLO FW 1.80 or later is installed.
		
			- The HP Systems Management Driver is installed.
		   
		   The issue will typically occur very early in the OS initialization 
		   when the Systems Management Driver is loaded. iLO FW 1.80 supports 
		   a new feature to report power state information and there is an 
		   incompatibility when the HP Systems Management Driver is loaded. 
		   This issue is very timing dependent and does not always occur. 
		   This System ROM addresses this potential timing issue.




Known Problems -


        HP ProLiant ML570 G3 system ROM P37 (12/05/2005)
        =================================================

		None.               






HOW TO USE:


1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that directory.
The file that is downloaded is SP31861.EXE.


3.  From that drive and directory, execute the SoftPaq file:
SP31861.exe [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to
create diskette.


4.  After the diskette is created, you may delete the downloaded file
SP31861.EXE if you wish.


Copyright 2005, Hewlett-Packard Company.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies