TITLE: HP iPAQ hw6500 Mobile Messenger Series Storage Card Rename Utility

VERSION: 1.1.0
DESCRIPTION: 
This package contains the Storage Card Rename Utility for the listed HP iPAQ 
hw6500 Mobile Messenger Series models (English language only) and operating
systems. 

NOTE: Confirming the iPAQ model ID number before starting to download and 
install this package helps to prevent system errors. Use either of the 
following two methods to confirm the HP iPAQ model ID:

1. Power On the HP iPAQ handheld and tap Start, then tap Settings, then tap 
   the System tab, then tap HP Asset Viewer, and then tap the System tab. Look
   for "Model ID: hp iPAQ hw65XXx".

2. With the HP iPAQ handheld Powered Off, remove the battery cover and the 
   battery. The model ID is printed on a sticker that is located under the 
   battery. Look for "model#:hw65XXx". Be sure to reinsert the battery 
   promptly to avoid data loss.
  
Make sure that this package supports the model ID identified for the HP iPAQ 
handheld to be updated.
             
PURPOSE: Recommended
SOFTPAQ NUMBER: sp31751
SUPERSEDES: None
EFFECTIVE DATE: 01 February 2006
CATEGORY: Software - Solutions
SSM SUPPORTED: No

PRODUCT TYPE(S): 
Handhelds

HARDWARE PRODUCT MODEL(S):
HP iPAQ hw6510 Mobile Messenger
HP iPAQ hw6510a Mobile Messenger
HP iPAQ hw6510b Mobile Messenger
HP iPAQ hw6510c Mobile Messenger
HP iPAQ hw6510d Mobile Messenger
HP iPAQ hw6510h Mobile Messenger

HP iPAQ hw6515 Mobile Messenger
HP iPAQ hw6515a Mobile Messenger
HP iPAQ hw6515b Mobile Messenger
HP iPAQ hw6515c Mobile Messenger
HP iPAQ hw6515d Mobile Messenger
HP iPAQ hw6515e Mobile Messenger
HP iPAQ hw6515f Mobile Messenger
HP iPAQ hw6515h Mobile Messenger

OPERATING SYSTEM(S): 
Microsoft Windows Mobile 2003 SE - Pocket PC Phone Edition

LANGUAGE(S):
English 

ENHANCEMENT(S):
- Adds the ability to change the "SD Card" or "Mini-SD Card" storage naming 
  convention to "Storage Card" in order to enable the storing of an Inbox 
  Attachment to the external storage card. Currently, a software issue
  prevents storing attachments to an external storage card having a name of
  "SD Card" or "Mini-SD Card."

PREREQUISITES: 
- Microsoft ActiveSync 3.8 (or later) is required.

HOW TO USE:

1. Download the SoftPaq .EXE to a directory on your hard drive. 

2. Execute the downloaded file and follow the on-screen instructions.

3. To complete the installation, perform a soft reset on the HP iPAQ 
   handheld. 

4. To find the newly installed utility, tap Start, then tap Settings, and 
   then tap the System tab at the bottom of the screen. From the System
   tab, tap the icon labeled "Storage Card Rename Utility."



Copyright (c) 2006 Hewlett-Packard Development Company, L.P.