SOFTPAQ NUMBER: SP31563

PART NUMBER: N/A 
FILE NAME: N/A
TITLE: Mapping of load segment 3 when using Six Port Card with UPS 

VERSION: 1.04

LANGUAGE: English

CATEGORY: SoftPaqs

DIVISION: Systems

PRODUCTS AFFECTED: Six Port Card.

Systems Updated:
- ProSignia, ProSignia VS, ProSignia 200/300/500, Prosignia Server 720/740
- Proliant 800/850R/1000/1200/1500/1600/1850R/2000/2500/3000/4000/4500/5000/5500/6000/6500/7000/8000/8500/DL380/ML350/ML370/ML530/DL580, Rack-Mountable Proliant Servers or SystemPro, SystemPro/e, SystemPro/LT, SystemPro/XL

Options Affected:
 
OPERATING SYSTEM: Microsoft Windows 95/98/NT4/WIN2000/win2003

SYSTEM CONFIGURATION: N/A

EFFECTIVE DATE: Jan 26, 2006

ELECTRONIC DISTRIBUTION ALLOWED: Yes

SOFTPAQ UTILITY VERSION: 5.1

SUPERSEDES: N/A
 
DESCRIPTION: This utility is used with the Six Port Card and UPS.  This utility will allow the mapping of load segment 3 to be controlled by the server attached to load segment 2. Six Port Cards with Firmware Revision 1.04 (or later) will allow the HP Power Manager software to properly power off load segments and the UPS as part of the normal shutdown process when a power event occurs (e.g.;power failure).  
 
Fixes:
1. Fixed Baud rate change function through XCP command Set Communication Parameter.
2. Changed serial (Plug and Play) PnP string to “UPS MultiServer Adapter”.
3. Corrected machine code to 150 for the Six Port card. 
4. Six Port Cards with Firmware Revision 1.04 (or later) will allow the HP Power Manager software to properly power off load segments and the UPS as part of the normal shutdown process when a power event occurs (e.g.;power failure). 	

Enhancements:
1. Corrected the polling logic to cease polling if the block request gets a "not implemented" response or if it times out repeatedly.
2. Boot Loader version 1.07 is included in this release to add support for the new ATMEL part, AT49F002AT-55JC.
 
HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and change to that directory. This executable file is downloaded as a self extracting compressed file.  Run the file to extract the required flash utility and firmware.

2. From the specified drive and directory, execute the Flash utility and follow the on-screen instructions. (See Note)*

*Note: Use the detailed Word document instructions located within the extracted files to perform the Firmware Flash Procedure.  
 
Copyright 2005, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks 
of their respective companies.