SOFTPAQ NUMBER:  SP31490
PART NUMBER:  N/A
FILE NAME: SP31490.EXE
TITLE:  Single Point Solution Systems ROMPaq Firmware Upgrade Diskette for
        HP ProLiant ML370 G4 Servers.

VERSION:  10/12/2005

LANGUAGE:  English

CATEGORY:  ROMPaqs

DIVISIONS:  Systems

PRODUCTS AFFECTED:   HP ProLiant ML370 G4 Servers

OPERATING SYSTEM:  ALL

SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  N/A

EFFECTIVE DATE:  October 14, 2005

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  2.X

SUPERSEDES:  N/A


DESCRIPTION: This release provides a Single Point Solution
User ROMPaq diskette for the HP ProLiant ML370 G4 Servers.


New Features -

        P50 ProLiant ML370 G4 system ROM (10/12/2005)
        =========================================================
 
            None.
		


Problems Fixed -

        P50 ProLiant ML370 G4 system ROM (10/12/2005)
        =========================================================

            Updated LSI U320 SCSI Option ROM to version 5.05.19. This Option
	    ROM resolves issues seen with One Button Disaster Recovery (OBDR)
	    Tape drive support when standup LSI U320 SCSI controllers are 
	    installed in the system. This issue would cause hard disk attached
	    to the SCSI controller to not be seen by the OBDR Tape Software.

Known Problems -

            None. 



HOW TO USE:

1.  Obtain a formatted 1.44 MB diskette.

2.  Download the SoftPaq to a directory on your hard drive and change to that directory.
The file that is downloaded is SP31490.EXE.

3.  From that drive and directory, execute the SoftPaq file:
SP31490.EXE [ENTER]
You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to
create diskette.

4.  After the diskette is created, you may delete the downloaded file
SP31490.EXE if you wish.

Copyright 2005, Hewlett-Packard Company.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies.