TITLE: HP Compaq Blade Workstation Client Image Recovery

VERSION: 1.00 Rev. A
DESCRIPTION:
This package contains the tools and image needed to restore or replace the 
operating system image on the HP Compaq Blade Workstation Client running the HP 
Blade Workstation Client Embedded (OEM) Operating System.

NOTE: The image contained in this package must be deployed on a 256-MB drive 
key (or larger).

PURPOSE: Routine
SOFTPAQ NUMBER: SP30752
SUPERSEDES: None
EFFECTIVE DATE: July 11, 2005
CATEGORY: Software
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

PRODUCT MODEL(S):
HP Compaq Blade Workstation Client: All Models

OPERATING SYSTEM(S): 
HP Blade Workstation Client Embedded OS

LANGUAGE(S): 
Global

ENHANCEMENTS: 
N/A

PREREQUISITES: 
- 256-MB (or larger) drive key is required for image deployment.

HOW TO USE: 
1. Download the SoftPaq .EXE file to a directory on your hard drive. 

2. Execute the downloaded file to extract the files.

The utility contained in this SoftPaq is only to be used in the deployment of 
this factory image.

3. With the appropriate USB drive key plugged in, open a command window and run 
dskimg32.exe to obtain the drive key ID (only one drive key should be plugged 
in when running this program).

4. Run dskimg32.exe client_050617.img.
EXAMPLE: dskimg32.exe client_050617.img HD3 (where ''HD3'' is the device ID).

NOTE: Be sure to use the correct disk storage device ID, because all data on 
the device will be replaced by the client image.

5. Start (boot) the HP Compaq Blade Workstation Client from the USB drive key 
and follow the on-screen instructions.



Copyright (c) 2005 Hewlett-Packard Development Company, L.P.