SOFTPAQ NUMBER: SP30671

Note: This softpaq was created ONLY to make a correction to Step 5 of the test procedure. Firmware version v3.62 did not change. This Softpaq is only needed when using the SNMP card pn 192189-B21 with the R12000XR pn 207552-B22.

PART NUMBER: N/A 
FILE NAME: N/A
TITLE: SNMP/Serial Port Card Firmware V3.62 
VERSION: V3.62
LANGUAGE: English

CATEGORY: RomPaqs

DIVISION: Systems

PRODUCTS AFFECTED: SNMP/Serial Port Card

Systems Updated:
-ProSignia, ProSignia VS, ProSignia 200/300/500, Prosignia Server 720/740
-Proliant 800/850R/1000/1200/1500/1600/1850R/2000/2500/3000/4000/4500/5000/5500/6000/6500/7000/8000/8500/ML110
/ML150/ML310/ML330/ML350/ML370/ML530/ML570/DL140/DL145/DL320/DL360/DL380/DL385/DL560/DL580/DL585/DL740
/DL760, Rack Mountable Proliant Servers or Systempro, Systempro/e, Systempro/LT, Systempro/XL

Options Affected: SNMP/Serial Port Card

OPERATING SYSTEM: Microsoft Windows 95/98/NT4/WIN2000/XP/2003

SYSTEM CONFIGURATION: N/A

EFFECTIVE DATE: September 14, 2005 			

ELECTRONIC DISTRIBUTION ALLOWED: Yes
	
SOFTPAQ UTILITY VERSION: 5.1

SUPERSEDES: SP29020

DESCRIPTION: The SNMP/Serial Port Card firmware update is designed to upgrade the firmware of the following SNMP/Serial Port Card to V3.62.  pn 192189-B21

Using HPPM, you could not connect to the UPS through the network.  

Using HPRPM, you could connect to the UPS (ping), but the UPS would not response when issued a shutdown command.   

Fixes: - Corrects the shutdown feature on the R12000XR.    

The 3.62 firmware corrects the shutdown feature on the R12000XR when using an SNMP card.  You can now connect to the UPS through SNMP and the UPS will respond to the shutdown command issued by the software.  



HOW TO USE:
1. Download the SoftPaq to a directory on your hard drive and change to that directory. This executable file is downloaded as a self extracting compressed file.  Run the file to extract the required flash utility and firmware.

2. From the specified drive and directory, execute the Flash utility by clicking on the Update.bat file. (See Note)*

*Note: Use the detailed Word document instructions located within the extracted files to perform the Firmware Flash Procedure.  
 
Copyright 2005, HP Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.