TITLE: HP ProLiant BL e-Class Integrated Administrator

VERSION: 1.51 Rev. A
DESCRIPTION:
This package contains the firmware image file for the HP ProLiant BL e-Class 
Integrated Administrator. 

The Integrated Administrator provides management capabilities for the HP 
ProLiant BL e-Class Enclosure. This firmware image is loaded on the Integrated 
Administrator card in the enclosure, it is not loaded on the HP bc1000 Blade 
PC.

NOTE: This package provides the initial release of the HP ProLiant BL e-Class 
Integrated Administrator firmware v1.51 to support the HP bc1000 Blade PC. The 
included readme.txt file contains detailed information about the fixes and 
enhancements provided in version 1.51 of the Integrated Administrator firmware, 
as well as providing installation instructions for the HP ProLiant e-Class 
Enclosures used in the Consolidated Client Infrastructure (CCI) 
implementation.

PURPOSE: Routine
SOFTPAQ NUMBER: SP30640
SUPERSEDES: None
EFFECTIVE DATE: July 13, 2005
CATEGORY: Firmware
SSM SUPPORTED: No

PRODUCT TYPE(S):
Desktops

PRODUCT MODEL(S):
HP bc1000: All Models

OPERATING SYSTEM(S): 
Windows XP Professional

LANGUAGE(S): 
Global

ENHANCEMENTS: 
- Adds SET BAUDRATE BAY [ 1~20 ] [ 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 
57600 | 115200 ] command. This command can be used to set the blade serial 
console baudrate, which is used by the CONNECT command to connect to the blade 
serial console. The blade serial console baudrate settings are stored 
permanently in the NVRAM. 

- Enhances the SHOW BAUDRATE command. This command has been enhanced to show 
the current baudrate settings for both bays (1-20) and switches (A,B). 

- Provides an updated OpenSSL 0.9.7d component.

NOTE: Vulnerabilities that are addressed in this firmware are documented at:
http://www.kb.cert.org/vuls/id/288574 

FIXES: 
- Corrects minor command-line interface (CLI) issues.

PREREQUISITES: 
N/A

HOW TO USE: 
1. Download the SoftPaq .EXE file to a directory on your hard drive.

2. Execute the downloaded file and follow the on-screen instructions.

3. Place the firmware image file (cpqia151.bin) on an FTP, HTTP, or TFTP server 
that is network-accessible from the Integrated Administrator that you want to 
update. 

4. Using Telnet, SecureSH, or a serial terminal, login as the Administrator on 
the Integrated Administrator that you want to update. 

5. At the ''>'' prompt, type the following command:
UPDATE IMAGE < url > 

Where < url> can be any of the following items:
http://host/path 
ftp://host/path 
ftp://username:password@host/path 
tftp://host/path 

NOTE: In the previously listed items, ''host'' is a fully qualified domain name 
or IP address, and ''path'' is the pathname of the flash image to download, 
usually cpqia151.bin. 

6. Type ''yes'' to confirm the flash update operation. The Integrated 
Administrator prompts all users to log off, then waits one minute, and then 
downloads the image file, verifies the image file, and finally re-programs its 
flash memory. Do not Power Off or reset the enclosure during this process. If 
the flash programming process is successful, the Integrated Administrator 
automatically restarts (reboots). 

NOTE: The Integrated Administrator firmware update process (including a 
restart) will not affect the operation of any server blades that may be running 
within the enclosure. If you are upgrading from Version 1.11 or earlier, the 
Integrated Administrator (after restarting) will temporarily lose access to 
server blade information (such as server name, MAC addresses, processor, 
memory, and so forth) until the next time each server blade is rebooted. 

For additional information, refer to the user guide for the Integrated 
Administrator, which is located at:
ftp://ftp.compaq.com/pub/supportinformation/techpubs/user_reference_guides/24907
0-005_rev5_us.pdf 

MD5 CHECKSUM: 
MD5 (cpqia151.bin) = e1ca81953ddc5a571026e884dea2



Copyright (c) 2005 Hewlett-Packard Development Company, L.P.