SOFTPACK NUMBER: SP30565 PART NUMBER: FILE NAME: SP30565.tgz TITLE: ProLiant BL p-Class GbE2 Interconnect Switch Boot Image for Linux VERSION: 2.2.0 LANGUAGE: English (US) CATEGORY: Firmware - Blade Infrastructure DIVISIONS: Server PRODUCTS AFFECTED: ProLiant BL20p All Models ProLiant BL25p All Models ProLiant BL30p All Models ProLiant BL35p All Models ProLiant BL40p All Models ProLiant BL45p All Models ProLiant BL p-Class GbE2 Interconnect Switch OPERATING SYSTEM: All HP-supported Linux versions SYSTEM CONFIGURATION: N/A PREREQUISITES: EFFECTIVE DATE: 6/9/05 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPACK UTILITY VERSION: SUPERSEDES: cp005331 DESCRIPTION: This SoftPaq contains the ProLiant BL p-Class GbE2 Interconnect Switch boot image and Readme files. Enhancements/Fixes: This boot image version should be used with the same version ProLiant BL p-Class GbE2 Interconnnect Switch firmware image to ensure correct operation and behavior. HOW TO USE: Download the SoftPaq to a directory on your target computer. The SoftPaq is a .tgz file with a file name based on the SoftPaq Number. Run this command to extract the files from the .tgz file: tar -zxvf *.tgz Place the firmware image file (*.bin) on a TFTP server that is network-accessible from the switch you wish to update. Use the switch's command line interface (CLI) to update the firmware. Alternately, the switch's serial console may be used to update the firmware. See the switch's User Guide for detailed instructions. Refer to the Softpaq README file for installation instructions and firmware information. ------------------------------------------------------------------------ (C) Copyright 2005 Hewlett-Packard Development Group, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies