SOFTPAQ NUMBER: SP3247 PART NUMBER: 183099-006 FILE NAME: N/A TITLE: Compaq Support Software for Microsoft Windows NT 3.51 and 4.0 VERSION: 1.22 Rev A LANGUAGE: English CATEGORY: Drivers/Misc PRODUCTS AFFECTED: Server Products and Professional Workstations OPERATING SYSTEM: Microsoft Windows NT Version 3.51 and 4.0 SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: 13 May 1997 SUPERSEDES: SP2748 DESCRIPTION: This SoftPaq creates the Compaq Support Software for Microsoft Windows NT 3.51 and 4.0 diskette plus four other diskettes that support the subsystems and features listed below for Compaq Servers and Professional Workstations. This same software is available in SoftPaq SP3256 in a form that copies installation files to the hard disk rather than creating diskettes. NetFlex/NetFlex-2/NetFlex-3 network adapter family NetFlex-3 network adapter monitoring, configuration and duplex utility Compaq 10T PCI UTP and 10/100 TX PCI UTP IDA/IDA-2 disk controller SMART/SMART-2 array controller 32-Bit SCSI-2 Family of controllers ProLiant Storage System System Management/Health driver UPS support Compaq HAL Support (ISA, Uniprocessor, and Multiprocessor) Compaq Recovery Server, Standby Agent with SMART-2 support Compaq Recovery Server, Online Agent with SMART-2 support Compaq Remote Insight Board driver Compaq Support Software diskette Installation utility Matrox Millennium video controller ELSA Gloria-L video controller ESS AudioDrive audio controller The following diskettes can be created using the files that result when the SoftPaq is unbundled: Disk 1 - Compaq Support Software for Microsoft NT 3.51 and 4.0 Disk #1 Disk 2 - Compaq Support Software for Microsoft NT 3.51 and 4.0 Disk #2 Disk 3 - Matrox MGA Millennium Video Drivers and ESS 1868 Audio Drivers for Microsoft Windows NT 3.51 and 4.0 Disk 4 - ELSA Gloria-L Video Drivers for Microsoft Windows NT 4.0. Disk 5 - ELSA Gloria-L Video Drivers for Microsoft Windows NT 3.51. HOW TO USE: 1. Obtain five formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP3247.EXE. 3. From that drive and directory, execute the SoftPaq file: SP3247 [ENTER] The following files will be created: QRST5.EXE 183099US._01 183099US._02 183099US._03 183099US._04 183099US._05 183099US.DOC 4. Please read 183099US.DOC for instructions on using QRST5 to create the diskettes and for the steps to install the software. 5. After the disks are created, you may delete the downloaded file SP3247.EXE and the other files it created from your hard drive if you wish. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies