SOFTPAQ SOLUTION: SP3068 PART NUMBER: 275289-072, 275290-072, 275291-072, 275292-072 FILE NAME: N/A TITLE: Compaq System Configuration Utility VERSION: 2.34 Rev A LANGUAGE: Spanish CATEGORY: Diagnostics/Setup PRODUCTS AFFECTED: ProSignia, ProSignia VS, ProSignia 200, ProSignia 300, ProSignia 500, Systempro, Systempro/E, Systempro/LT, Systempro/XL, Deskpro/L Family, Deskpro/M Family, Deskpro/XL Family, Portable 486, ProLiant 800, ProLiant 1000, ProLiant 1500, ProLiant 2500, ProLiant 2000/4000, ProLiant 4500, ProLiant 5000, ProLiant 6000, Rack-Mountable ProLiant Servers OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: April 15, 1997 ELECTRONIC DISTRIBUTION ALLOWED: Yes SUPERSEDES: SP2885 DESCRIPTION: Creates the four System Configuration For Compaq EISA and EISA/PCI Products diskettes, which support all currently shipping Systems Division server products. It is installed on the System Partition for those systems which support it and have hard drives. It is shipped as diskette(s) on all other products. New Features: 1. Includes support for Compaq ProLiant 850R and ProLiant 6000 servers. 2. Includes support for the Compaq Smart-2SL Array Controller. 3. Adds support for the Citrix WinFrame 1.6 Operating System. 4. The PCI IRQ sharing rules were optimized to avoid having Mass Storage Device Controllers and Network Interface Cards share interrupts. Problems Fixed: 1. This version of the System Configuration Utility (SCU) must be used when adding the memory expansion board to a ProLiant 2000, 4000, or 4500 which was previously configured with version 2.32A or later of the SCU without the memory expansion board installed. NOTE: Using any version of the System Configuration Utility prior to 2.34A will result in an unsuccessful hardware upgrade. 2. If a year of 2000 or greater was entered when prompted by the System Configuration Utility, the utility would continue to prompt for the date each time it was invoked. This has been corrected. 3. If values are entered for the Compaq Integrated Management Display during a SmartStart Assisted Path Installation , then the System Configuration would truncate the last character of multi-line entries. This has been corrected. HOW TO USE 1. Download the SoftPaq to a directory on your hard drive and change to that directory. The file downloaded to your hard drive is SP3068.EXE. 2. Obtain four (4) formatted 1.44MB diskette and place a diskette in one of your diskette drives. 3. Execute the SoftPaq file to create the diskettes: SP3068 [ENTER] You will be prompted to enter the remaining diskettes when needed. 4. After the diskettes are created, you may delete the downloaded file SP3068.EXE if you wish. 5. To run the Compaq System Configuration Utility, power down your computer, place the Compaq System Configuration Utility diskette 1 in Drive A:, and power up your computer. Copyright 1995,1997 Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies