TITLE: HP xw9300 Workstation LSI20320A-R Card Firmware and BIOS Utility

VERSION: 1.00 Rev. A
DESCRIPTION:
This package contains the LSI Logic Ultra320 SCSI RAID IS and IME Firmware and 
BIOS for the LSI20320A-R card installed in the listed workstation models and 
operating systems.

NOTE: This flash utility provides the RAID firmware and BIOS for the 
LSI20320A-R card installed in an HP xw9300 Workstation. This utility does not 
support IT firmware and should not be used to update the flash for the embedded 
LSI controller in an HP xw9300 workstation. The embedded LSI SCSI controller 
must be disabled prior to updating the host bus adapter (HBA) firmware and 
BIOS. It is important to follow the on-screen instructions when updating the 
LSI20320A-R firmware and BIOS in the HP xw9300 Workstation.

PURPOSE: Routine
SOFTPAQ NUMBER: SP30348
SUPERSEDES: None
EFFECTIVE DATE: February 17, 2005
CATEGORY: Utility - Tools
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

PRODUCT MODEL(S):
HP Workstation xw9300: All Models

OPERATING SYSTEM(S): 
Windows XP Professional

LANGUAGE(S): 
Global

ENHANCEMENTS: 
N/A

PREREQUISITES: 
- The embedded LSI SCSI controller must be disabled before updating the HBA 
firmware and BIOS using this SoftPaq.

HOW TO USE: 
1. Download the SoftPaq .EXE file to a directory on your hard drive.

2. Execute the downloaded file and follow the on-screen instructions to create 
a bootable diskette.

3. Leave the newly created bootable diskette in the diskette drive and restart 
the workstation, allowing it to boot from the diskette, and follow on-screen 
instructions.



Copyright (c) 2005 Hewlett-Packard Development Company, L.P.