TITLE: Intel Application Accelerator (IAA) SATA RAID Driver/Application VERSION: 4.5.1.6809 Rev. A DESCRIPTION: This package contains the Intel Application Accelerator (IAA) Serial ATA (SATA) RAID Driver and Application for the listed workstation models and operating systems. PURPOSE: Recommended SOFTPAQ NUMBER: SP29857 SUPERSEDES: SP28501 EFFECTIVE DATE: December 16, 2004 CATEGORY: Driver - Storage SSM SUPPORTED: No PRODUCT TYPE(S): Workstations PRODUCT MODEL(S): HP Workstation xw4200: All Models HP Workstation xw6200: All Models HP Workstation xw8200: All Models OPERATING SYSTEM(S): Windows 2000 Windows XP Professional LANGUAGE(S): Global ENHANCEMENTS: - Adds a new list of driver correlations to workstation types in order to improve the installation process. FIXES: - Fixes issue on HP Workstation xw6200 and HP Workstation xw8200 that may occur when resuming from Sleep mode (S4). PREREQUISITES: N/A HOW TO USE: 1. Download the SoftPaq .EXE file to a directory on your hard drive. 2. Execute the downloaded file and follow the on-screen instructions. The self-extracting file stores the drivers in the C:\SWSETUP\IAA_4.5.1.6809 directory. To update the driver and application on a working system, execute the ''iata_enu.exe'' from the C:\SWSETUP\IAA_4.5.1.6809\Application directory. TO INSTALL OPERATING SYSTEM ON A SATA RAID ARRAY: Install the driver using the F6 Installation function when installing Microsoft Windows or build a pre-installation image with the driver. The drivers can be extracted from the self-extracting F6_Install.exe file. This will locate the files in the C:\SWSETUP\IAA_4.5.1.6809\F6_Install. The F6_Install.exe extracts the following files: - iaAHCI.cat (8 KB) - iaAHCI.inf (3 KB) - iaStor.cat (8 KB) - iaStor.inf (4 KB) - iaStor.sys (467 KB) - TXTSETUP.OEM (3 KB) These files can then be copied to a diskette for installation when F6 is pressed during the operating system installation. FOR A DATA SATA RAID ARRAY IMAGE: 1. Install the driver and application after you have the operating system on a different hard drive. 2. Install two SATA hard drives to the onboard SATA ports and enable the SATA RAID option ROM in the systems BIOS setup prior to booting to Windows. 3. Execute the following command from C:\SWSETUP\IAA_4.5.1.6809: iata_enu.exe The preceding command installs the IAA 4.5.1.6809 driver and the IAA application that configures and controls the SATA RAID arrays. NOTE: If the option ROM is not enabled, the following error message is displayed: ''This hardware is incompatible'' Copyright (c) 2005 Hewlett-Packard Development Company, L.P.