TITLE: HP Installer Kit for Linux - Installer CD for Red Hat 7.2 

VERSION: E Rev. 0
DESCRIPTION:
This package contains the bootable HP Linux CD ISO image to enable the Red Hat 
7.2 box set for the listed workstation models.
PURPOSE: Routine
SOFTPAQ NUMBER: SP29341
SUPERSEDES: None
EFFECTIVE DATE: December 6, 2004
CATEGORY: Software
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations

PRODUCT MODEL(S):
HP Workstation xw4200: All Models
HP Workstation xw6200: All Models
HP Workstation xw8200: All Models

OPERATING SYSTEM(S): 
Red Hat Linux 7.2

LANGUAGE(S): 
Global

ENHANCEMENTS: 
N/A

PREREQUISITES: 
- Red Hat 7.2 Box set must be purchased separately and be available when 
installing this SoftPaq.

- This HP Installer CD only works with workstations configured with SCSI hard 
drives. Serial ATA (SATA) hard drives are NOT supported by this HP Installer 
CD.

HOW TO USE: 
1. Download the .tgz file to local hard drive. Unpack the .tgz file with 'tar 
-xvzf .tgz. An .iso file will be unpacked.

2. Burn the .iso file to CD+R bootable media. For example, on a Linux 
Workstation use the 'cdrecord' utility: 'cdrecord -v -eject speed=16 dev=2,0,0 
.iso' where dev= is the device address for the CD-ROM burner that comes from 
'cdrecord --scanbus'.

3. Insert the HP Installer CD into the CD-ROM tray. 

4. Reboot to the ''Welcome to HP's Installer Disc'' screen.

5. Select 'gui' for a custom installation that leverages all RPMS needed to 
enable your HP hardware.

WARNING: This erases your hard drive and rewrites new disc partitions.

6. When prompted, insert the first Linux operating system CD from the Red Hat 
box set.

7. Continue following prompts until the operating system is sucessfully 
installed.



Copyright (c) 2004 Hewlett-Packard Development Company, L.P.