TITLE: HP iPAQ rx3700 Series Mobile Media Companion ROM Update VERSION: 1.01.10 DESCRIPTION: This package contains the ROM Update Utility (RUU) and ROM image for the listed iPAQ model and operating system. The ROM Update Utility replaces the current ROM image on the handheld with an updated version. IMPORTANT: This update utility is designed to replace the current ROM image and erase the partnership and all user data and programs on the iPAQ handheld. It is important to read and understand the information in the Readme.TXT file, which is included with this update, BEFORE installing this package. NOTE: Do not perform the ROM update through a USB hub, because it may cause the host PC to receive a "General Protection Fault" error, thereby forcing a reboot of the Host PC on completion of the ROM Update. This update does not work through a serial port connection. PURPOSE: Recommended SOFTPAQ NUMBER: SP29218 SUPERSEDES: SP28700 EFFECTIVE DATE: December 20, 2004 CATEGORY: BIOS SSM SUPPORTED: No PRODUCT TYPE(S): Handhelds PRODUCT MODEL(S): HP iPAQ rx3715 Mobile Media Companion OPERATING SYSTEM(S): Microsoft Windows for Pocket PC 2003 LANGUAGE(S): French ENHANCEMENTS: - Adds Windows Media Player 10 Mobile for Pocket PC. - Updates ROM to Bluetooth driver build 2600. - Updates ROM to iPAQ Mobile Media version 2.0.1.87. - Adds support for new memory types. FIXES: - Connectivity: Enables a Bluetooth phone to dial a contact. - Supports Nevo Media, which is compatible with Windows Media Player 10 Mobile. PREREQUISITES: N/A HOW TO USE: IMPORTANT: Performing the ROM Update through a USB hub is not recommended, because it may cause the host PC to receive a "General Protection Fault" error, thereby forcing a reboot of the Host PC on completion of the ROM update. 1. Download the SoftPaq .EXE file to a directory on your hard drive. 2. Execute the downloaded file and follow the on-screen instructions to unpack the ROM Update files to a directory. (NOTE: This directory should not contain any file or folder from any previous ROM upgrade.) 3. Follow the on-screen instructions to complete the ROM upgrade. INSTALLATION NOTES: 1. During the update, the ROM Update Utility will: - Query the handheld for current ROM image information. - Validate that the new ROM image is compatible with the handheld. - Automatically place the iPAQ handheld in Flash mode. - Update the ROM image on the handheld. - Reset the handheld on completion. 2. IMPORTANT: Disable the Standby and Hibernation modes on the host PC. If Standby or Hibernation mode is activated during the upgrade process, a critical error may occur. 3. IMPORTANT: Plan for enough time to complete the update process. The total time needed to perform this ROM update is estimated at 10 minutes. 4. IMPORTANT: Do not interact with the handheld or remove it from AC power or the cradle/cable once the status bar appears on the handheld and the actual update has started. 5. If an error message is displayed during the process, follow any available instructions to correct the condition and start the ROM update utility again. 6. The update process can be performed while connected to a host PC either as a Guest or with an established partnership. Copyright (c) 2004 Hewlett-Packard Development Company, L.P.