SOFTPAQ NUMBER:  SP29047 
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  HP Insight NIC Agent - SCO UnixWare 7 
VERSION:  7.20 Rev a
LANGUAGE:  English 

CATEGORY:  Agents 

DIVISIONS:  Systems

PRODUCTS AFFECTED:

ProLiant ML330 G3 SCSI	ProLiant ML350 G3	ProLiant ML350 G4
ProLiant DL360 G2	ProLiant ML370 G3	ProLiant ML370 G4
ProLiant DL380 G3	ProLiant DL380 G4	ProLiant ML530 G2
ProLiant ML570 G2	ProLiant ML570 G3	ProLiant DL760 G2

------------------------------------------------------------------------

Note:  EFS 7.66 contains temporary alternative solution for the installation of 
       OEM Intel and Broadcom network drivers. Depending on the status of the 
       corresponding package in your system, 7.66 network drivers will be 
       installed either as an integrated part of typical EFS package or by 
       executing pkgadd(1M) command separately. hp is currently investigating 
       a permanent delivery method for OEM network drivers. The new method 
       should be available in EFS 7.68.
       

OPERATING SYSTEM:  SCO UnixWare 7 Release 7.1.3
		   SCO UnixWare 7 Release 7.1.4

DISCLAIMER: Installing this software on OS versions or the ProLiant 
	    Servers other than listed above may result in unexpected 
	    behavior.
   
SYSTEM CONFIGURATION:  N/A

PREREQUISITES:  hp ProLiant Extended Feature Supplement, 7.66a
		HP Insight Foundation Agent - SCO UnixWare 7, v7.20a
		HP Insight Server Agent - SCO UnixWare 7, v7.20a
		  
EFFECTIVE DATE:  March 04, 2005

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SUPERSEDES: SP25766

DESCRIPTION:   Creates one diskette containing HP Insight NIC  
Agent - SCO UnixWare 7 , Version 7.20a.

ENHANCEMENTS AND FIXES:
1. Support for NC 320T Controller.
2. Support for NC 310F Controller.
3. Provided support for Intel management interface.

HOW TO USE:

1. Download the SoftPaq to a directory on your hard drive and
   change to that directory. The file that is downloaded is
   SP29047.exe.

2. From that drive and directory execute the downloaded file and
   follow the on-screen instructions.The QRST5 utility will be launched
   during this process which will help you in creating the diskette.

3. Refer to README.TXT for instructions to proceed with QRST5 for 
   creating the diskettes and steps to install the software. The 
   README.TXT file along with the following files will be extracted
   in the directory that you specify for saving the files while 
   executing SP29047.exe:
   The following files will be created:
        SP29047._01
        README.TXT
	QRST5.exe
   
4. After the installation is complete, you may delete the downloaded
   file SP29047.exe and the files unpacked in step 3 from your hard
   drive.


(c) 2003-2005, Hewlett-Packard Development Company, L.P. 
Copyright 1991-2005, The SCO Group, Inc. All Rights reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.