TITLE: HP Insight Diagnostics Offline Edition (ISO file only) VERSION: 6.4.2 Rev. A DESCRIPTION: The HP Insight Diagnostics maintenance utility displays information about the system hardware configuration and performs system and component tests to ensure that the system is operating properly. PURPOSE: Recommended SOFTPAQ NUMBER: SP28655 SUPERSEDES: None EFFECTIVE DATE: August 25, 2004 CATEGORY: Diagnostic SSM SUPPORTED: No PRODUCT TYPE(S): Workstations PRODUCT MODEL(S): HP Workstation xw4100: All Models HP Workstation xw4200: All Models HP Workstation xw6000: All Models HP Workstation xw6200: All Models HP Workstation xw8000: All Models HP Workstation xw8200: All Models OPERATING SYSTEM(S): Windows 2000 Windows NT 4.0 Windows XP Professional LANGUAGE(S): Global ENHANCEMENTS: N/A PREREQUISITES: N/A HOW TO USE: This package provides a master ISO image file of the HP Insight Diagnostics Offline Edition CD-ROM. From this ISO file, you can burn your own bootable CD. A CD (ISO) image is not a collection of compressed or uncompressed data files; nor is it an executable (binary). Rather, it is a large, single file, which must be copied exactly as is onto a CD. In effect, you download the image from the download site, "burning" its contents onto your CD. Burn the full ISO image onto a blank CD using a CD-ROM burner and any major CD-burning software, such as Roxio (Adaptec) or Nero. Most common CD-burning software applications should have the ability to burn an “image” to CD. The following procedure provides an example for creating a bootable data CD from an ISO image file (Using Roxio/Adaptec Software): 1. Insert a blank CD into your CD-Recorder (the destination drive). 2. From the File menu, select Create CD from CD Image. 3. Select the image file (*.iso file) you want to make into a CD. 4. Click Open. The CD Creation Setup dialog box appears. 5. If necessary, change the CD Creation Setup settings. 6. Click OK. The following procedure explains how to run the HP Insight Diagnostics from the newly burned CD: 1. Enable your system to boot from CD. 2. Insert the HP Insight Diagnostics CD that you burned into the CD drive. 3. Shut down and restart the computer, allowing it to boot from the CD. 4. HP Insight Diagnostics automatically loads and runs. Copyright (c) 2004 Hewlett-Packard Development Company, L.P.