TITLE: HP Installer Kit for Linux-HP Driver CD for Red Hat Enterprise Linux 3 VERSION: Update 1 Rev. B DESCRIPTION: This package contains the HP Installer Kit for Linux - HP Driver CD ISO image to enable the Red Hat Enterprise 3 box set for the listed workstation models. PURPOSE: Routine SOFTPAQ NUMBER: SP27710 SUPERSEDES: None EFFECTIVE DATE: January 25, 2005 CATEGORY: Software SSM SUPPORTED: No PRODUCT TYPE(S): Workstations PRODUCT MODEL(S): HP Workstation xw4100: All Models HP Workstation xw6000: All Models HP Workstation xw8000: All Models OPERATING SYSTEM(S): RH Ent Linux 3 (x86) LANGUAGE(S): Global ENHANCEMENTS: - Provides updated drivers. PREREQUISITES: A retail Red Hat Enterprise Linux 3 box set must be purchased separately and must be available when installing this SoftPaq. HOW TO USE: 1. Download the .tgz file to your local hard drive. Unpack the .tgz file with 'tar -xvzf . An .iso file is unpacked. 2. Burn the .iso file to CD-R bootable media. For example, on a Linux Workstation use the 'cdrecord' utility: 'cdrecord -v -eject speed=16 dev=2,0,0 filename.iso' where dev= is the device address for the CD-ROM burner that comes from 'cdrecord --scanbus'. 3. Insert the first disc from the Red Hat box set, when prompted. 4. Select the option for loading Linux that best suits your needs: - 'gui' for a custom installation that leverages all RPMS needed to enable your HP hardware. WARNING: This option erases your hard drive and rewrites new disc partitions. - 'install' for a HP identified installation that leverages all RPMS needed to enable your HP hardware, as well as specific RPMS identifed to optimize your HP Workstation experience. 5. When prompted at the end of the installation for additional software, insert the Driver CD you've made from this .iso. 6. Continue following prompts until the operating system is sucessfully installed. Copyright (c) 2004-2005 Hewlett-Packard Development Company, L.P.