TITLE: Promise SATA150 TX4 Controller Driver VERSION: 1.0.0.0140.15 Rev. A DESCRIPTION: This contains the Promise SATA 150 TX4 SATA only driver for the Workstation models and operating systems listed. PURPOSE: Critical SOFTPAQ NUMBER: SP27853 SUPERSEDES: None EFFECTIVE DATE: May 4, 2004 CATEGORY: Driver - Storage SSM SUPPORTED: No PRODUCT TYPE(S): Workstations PRODUCT MODEL(S): HP Workstation xw6000: All Models HP Workstation xw8000: All Models HP Workstation xw8200: All Models OPERATING SYSTEM(S): Windows 2000 Windows XP Professional LANGUAGE(S): Global ENHANCEMENTS: N/A PREREQUISITES: N/A HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file that is downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions. The self-extracting file will store the drivers in the C:\SWSETUP\SATA directory. 3. In Windows, go to Device Manager and select the Other Devices or SCSI and RAID Controllers, then right click the yellow bang mark Mass Storage Controller and select properties. Click on the Driver tab then click on Update the Driver. When the Hardware Update Wizard window pops up, select "Install from a list or specific location (Advanced)". Check the "Include this location in the search" then enter "C:\SWSETUP\SATA\" or browse for this location. Select the OS driver for the Promise SATA 150 TX series IDE controller. Select NEXT. The wizard will then indicate finish install of the 'OS' Promise SATA 150 TX Series IDE Controller, click on Finish. Click Close on driver window. Under Device Manager/SCSI and RAID controllers a new device should be detected "'OS' Promise SATA 150 TX Series IDE Controller". Copyright (c) 2004 Hewlett-Packard Development Company, L.P.