TITLE: PCI Serial and Parallel I/O Card Driver for Windows 2000 VERSION: 5.0.0.6 Rev A DESCRIPTION: This contains an updated Windows 2000 driver for the legacy dual-ported, serial and parallel I/O card from Hewlett Packard. The card provides both serial and parallel interfaces, with legacy I/O ranges functioning similarly to systems which have the serial and parallel ports on the system board. PURPOSE: Routine Release SOFTPAQ NUMBER: SP27449 SUPERSEDES: SP25654 EFFECTIVE DATE: March 4, 2004 CATEGORY: Driver - Network SSM SUPPORTED: No PRODUCT TYPE(S): Desktops PRODUCT MODEL(S): hp Compaq Business Desktop d530 Ultra-slim Desktop OPERATING SYSTEM(S): Microsoft Windows 2000 LANGUAGE(S): Global FIXES: - Corrects issue where MS Kernel Debugger would not function with driver. PREREQUISITES: N/A HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. During the Softpaq decompression, within the "Remove Installation Files" selection window, the second selection "Unpack the file used to perform the installation to the location specified below, ..." must be selected, or the unpacked Softpaq files will be deleted immediately after the Softpaq completes the decompression stage. 3. For driver installation instructions, please refer to the README.TXT file within the directory specified during the Softpaq decompression. Copyright (c) 2004 Hewlett-Packard Development Company, L.P.