TITLE: HP Insight Diagnostics Offline Edition VERSION: 6.2.1 Rev. A DESCRIPTION: The HP Insight Diagnostics maintenance utility displays information about the system hardware configuration and performs system and component tests to ensure that the system is operating properly. PURPOSE: Routine Release SOFTPAQ NUMBER: SP27123 SUPERSEDES: None EFFECTIVE DATE: February 23, 2004 CATEGORY: Diagnostic SSM SUPPORTED: No PRODUCT TYPE(S) Servers PRODUCT MODEL(S) HP ProLiant DL145: All Models OPERATING SYSTEM(S): OS Independent LANGUAGE(S): French German Italian Japanese Spanish US English PREREQUISITES: N/A HOW TO USE: IMPORTANT: The CD data is delivered as a single ISO image file (in the format .iso). This ISO image file is first downloaded to your hard disk and then must be burned directly to a CD-Rom, exactly as is. This is a large file (>60MB) and may take several minutes to download. Make sure you have enough space on your hard disk to store the image file. Download the .iso file indicated under Current Version above. Downloading this file will provide a master ISO image file of the most current HP Insight Diagnostics Offline Edition CD-Rom. From this ISO file, you can burn your own bootable CD-Rom. A CD (ISO) image is not a collection of compressed or uncompressed data files; nor is it an executable (binary). Rather, it is a large, single file, which must be copied exactly as is onto a CD. In effect, you will download the image from the download site, "burning" its contents onto your CD. Burn the full ISO image onto a blank CD-Rom using a CD-Rom burner and any major CD burning software such as Roxio (Adaptec) or Nero. Most common CD burn software applications should have the ability to burn an “image” to CD. Example Procedure for Creating a Bootable Data CD From an ISO Image File (Using Roxio/Adaptec Software) 1. Insert a blank CD into your CD-Recorder (the destination drive). 2. From the File menu, select Create CD from CD Image. 3. Select the image file (*.iso file) you want to make into a CD. 4. Click Open. The CD Creation Setup dialog box appears. 5. If necessary, change the CD Creation Setup settings. 6. Click OK. How To Run the HP Insight Diagnostics 1. Enable your system to boot from CD. 2. Insert the HP Insight Diagnostics CD that you burned into the CD drive. 3. Shutdown and restart the computer, allowing it to boot from the CD. 4. Diagnostics automatically loads and runs. Copyright (c) 2003 Hewlett-Packard Development Company, L.P.