TITLE: Adaptec 29160N SCSI Driver 

VERSION: 4.10.4000 Rev B
DESCRIPTION:
This contains the Windows 2000 driver for the Adaptec 29160N SCSI
Controller in the workstation models listed below.

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP25382
SUPERSEDES: SP19471 (for hp workstation xw4000 only)
EFFECTIVE DATE: September 18, 2003
CATEGORY: Driver - Storage
SSM SUPPORTED: No

PRODUCT TYPE(S):
Workstations
 
PRODUCT MODEL(S): 
hp workstation xw4000

OPERATING SYSTEM(S): 
Microsoft Windows 2000
 
LANGUAGE(S): 
Global

ENHANCEMENTS:
 - This provides updated support specifically for the hp workstation xw4000, and takes the
   place of SoftPaq SP19471 for the xw4000 only. softPaq SP19471 remains available for 
   support of other workstation models.
 
PREREQUISITES: 
N/A
 
HOW TO USE:
 
1.  Download the SoftPaq to a directory on your hard drive. The file downloaded
is a self-extracting executable with a filename based on the SoftPaq Number
listed on at the top of this document.

2.  Execute the downloaded file and follow the on-screen instructions.  Please
note the path where the SoftPaq contents will be extracted (the default is
'C:\SWSETUP\SP25382').

3.  After the files have been unpacked, you may delete the self-extracting file
downloaded in step 1.

4.  To update the driver:
    - Open Device Manager, navigate to Control Panel --> System --> Hardware -->
      Device Manager
    - Click the '+' symbol for the 'SCSI and RAID controllers' entry
    - Locate and highlight the appropreate SCSI controller
    - Open the device properties, Action --> Properties
    - From the Drivers tab, update the driver using the path from step 2

5.  Reboot the system if prompted.

6.  After the installation is completed, you may delete the directory created
in step 2 if you wish.
 
 
Copyright (c) 2003 Hewlett-Packard Development Company, L.P.