SOFTPAQ NUMBER: SP24928

PART NUMBER:N/A

FILE NAME: N/A

TITLE: Compaq Solaris Driver Update (DU) Diskette for Solaris 8

VERSION: 1.80

LANGUAGE: English

CATEGORY: Drivers

DIVISIONS: Systems

PRODUCTS AFFECTED:


ProLiant DL360 G2, ProLiant ML370 G2, ProLiant DL380 G2
ProLiant ML530 G2, ProLiant ML570 G2, ProLiant DL580 G2,
ProLiant DL360 G3, ProLiant ML370 G3, ProLiant DL380 G3.


OPERATING SYSTEM: Solaris 8 Intel Platform Edition.

SYSTEM CONFIGURATION: Above operating system.

PREREQUISITES: N/A

EFFECTIVE DATE: Sept 24, 2003

ELECTRONIC DISTRIBUTION ALLOWED: YES

SOFTPAQ UTILITY VERSION: 2.x

SUPERSEDES: SP21874

DESCRIPTION:

This  Softpaq  creates  Compaq Solaris Driver Update  (DU) Diskette 
for  supported Third Generation Smart Array Controllers.

CHANGES FROM PREVIOUS RELEASE:

1. Removed the DU Support for the following:
	
 	* Compaq SCSI Controller driver, "cpqncr".
	* Smart  Array  Controller driver, "smartii".
	* Compaq  Fibre Channel Controller driver,"cpqfcs".
	* Second   Generation  Smart  Array   Controllers 
	  driver, "cpqary2".
	* Adaptec Ultra160 Device Driver, "cadp160".
	* Broadcom NetXtreme Gigabit Ethernet Adapter Driver.


2. Added support for the following controllers in Third generation
   array controllers driver "cpqary3" ver 1.20:

	*  Smart Array 641 Controller.
	*  Smart Array 642 Controller.
	*  Smart Array 6400 Controller.
	*  Smart Array 6400 EM Controller.
		
HOW TO USE:

1. Download the  Softpaq file SP24928.EXE  to  an empty directory on  
   a Microsoft Windows system
 
2. From that directory, execute the Softpaq file:

        SP24928 [ENTER]

   The following files will be created:

        QRST5.EXE
        SOL8DUUS._01
        SP24928.TXT

3. Obtain 1 formatted 1.44-MB diskettes.

4. To create the Driver Update (DU) diskettes, run QRST5  and  follow
   the on-screen instructions.

5. After the Driver Update (DU) diskettes are  created, you may delete
   the downloaded file SP24928.EXE and the other files created on your
   hard drive if you wish.

6. The Driver Update (DU) Diskette has the  following  Readme Files :
   README.TXT - This file can be best viewed under non-unix  Operating
		System.
   ureadme    - This file can be best viewed under  Solaris  Operating
		System.
                Use the following commands to  view  ureadme  file  on
		Solaris Operating System.
		Check to see if Volume Management is running 
		# ps -ef | grep vold
		If Volume Management is running stop the same.
		# /etc/init.d/volmgt stop 
                Insert  the  Driver  Update  (DU)  diskette  into  the
		diskette drive.
                Mount the Driver  Update (DU)  diskette  at  the  /mnt
		mount point:
		# mount -F pcfs /dev/diskette  /mnt
		Move to /mnt mount point.
		# cd /mnt
		Use vi command to open the ureadme file.
		# vi ureadme
   These README.TXT and ureadme files on Driver Update (DU)  diskette,
   describes the procedure to load the Driver  Update  (DU)  diskette.

CONTROLLERS SUPPORTED:

Third Generation Smart  Array  Controllers  driver, "cpqary3", version 
1.20 supports  the  following Third Generation  Array Controllers.

*  Smart Array 5300 Controller
*  Smart Array 5i Controller
*  Smart Array 532 Controller
*  Smart Array 5312 Controller
*  Smart Array 641 Controller.
*  Smart Array 642 Controller.
*  Smart Array 6400 Controller.
*  Smart Array 6400 EM Controller.

Copyright 2003 Hewlett-Packard Development Group, L.P.
All rights reserved.

Product names mentioned herein may be trademarks and/or
registered trademarks of  their  respective  companies.