SOFTPAQ NUMBER: SP24899

PART NUMBER: N/A

FILE NAME: SP24899.exe

TITLE: HP Solaris Driver Update (DU) Diskette for Solaris 9

VERSION: 1.0

LANGUAGE: English

CATEGORY: Drivers

DIVISIONS: Systems

PRODUCTS AFFECTED:

ProLiant DL360 G3, ProLiant ML370 G3, ProLiant DL380 G3,
ProLiant ML570 G2, ProLiant DL580 G2.


OPERATING SYSTEM: Solaris 9 Intel Platform Edition.

SYSTEM CONFIGURATION: Above operating system.

PREREQUISITES: N/A

EFFECTIVE DATE: August 18, 2003

ELECTRONIC DISTRIBUTION ALLOWED: YES

SOFTPAQ UTILITY VERSION: 2.x

SUPERSEDES: N/A

DESCRIPTION:

This  Softpaq  creates  HP Solaris Driver Update  (DU) Diskette 
for  Third Generation Array Controllers. 

CHANGES FROM PREVIOUS RELEASE:

N/A


HOW TO USE:

1. Download the  Softpaq  to  an empty directory on  your hard drive
   and  change  to  that directory.  The file that  is downloaded is
   SP24899.EXE.

2. From that drive and directory, execute the Softpaq
   file:
        SP24899 [ENTER]

   The following files should be created:

        QRST5.EXE
        Sol9duus._01
        SP24899.TXT

3. Obtain 1 formatted 1.44-MB diskettes.

4. To create the Driver Update (DU) diskettes, run QRST5  and  follow
   the on-screen instructions.

5. After the Driver Update (DU) diskettes are  created, you may delete
   the downloaded file SP24899.EXE and the other files created on your
   hard drive if you wish.

6. Each of the Driver Update (DU) Diskette have the  following  Readme
   Files
   README.TXT - This file can be best viewed under non-unix  Operating
		System.
   ureadme    - This file can be best viewed under  Solaris  Operating
		System.
                Use the following commands to  view  ureadme  file  on
		Solaris Operating System.
		Check to see if Volume Management is running 
		# ps -ef | grep vold
		If Volume Management is running stop the same.
		# /etc/init.d/volmgt stop 
                Insert  the  Driver  Update  (DU)  diskette  into  the
		diskette drive.
                Mount the Driver  Update (DU)  diskette  at  the  /mnt
		mount point:
		# mount -F pcfs /dev/diskette  /mnt
		Move to /mnt mount point.
		# cd /mnt
		Use vi command to open the ureadme file.
		# vi ureadme
   These README.TXT and ureadme files on Driver Update (DU)  diskette,
   describes the procedure to load the Driver  Update  (DU)  diskette.

CONTROLLERS SUPPORTED:

The HP Solaris Driver Update(DU) Diskette contains  the  following 
Device Drivers and the Supported Hardware.

Third Generation Smart Array  Controllers driver, "cpqary3",version 1.10
supports  the  following Third Generation  Array Controllers.

* Smart 5i Controller
* Smart Array 5300 Controller
* Smart Array 532 Controller
* Smart Array 5312 Controller

Copyright (c) 2002, 2003 Hewlett-Packard Development Group, L.P.

Product names mentioned herein may be trademarks and/or
registered trademarks of  their  respective  companies.