TITLE: HP Workstation xw4100 System BIOS (786B3 BIOS) - Installation Package

VERSION: 1.09 Rev A
DESCRIPTION:
This SoftPaq contains ROM images, CVA file, and flash utilities for updating the system 
BIOS on the workstation models listed below.

The BIOS Family and BIOS date can be determined by pressing F10 on the target computer 
during system power on to run the Setup Utility, and then selecting File/System Information.
This information can be saved into a text file on a diskette or on a USB flash media device 
by selecting File/Save to Diskette. In order for a USB flash media device to be recognized 
by the system, the device must be attached before the computer is turned on.

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP24784
SUPERSEDES: None
EFFECTIVE DATE: August 13, 2003
CATEGORY: ROMPaq
SSM SUPPORTED: Yes

PRODUCT TYPE(S):
Workstations
 
PRODUCT MODEL(S): 
hp workstation xw4100

OPERATING SYSTEM(S): 
Microsoft Windows 2000
Microsoft Windows XP 32-bit Home
Microsoft Windows XP 32-bit Professional
 
LANGUAGE(S): 
US English

ENHANCEMENTS: 
 - Supports Package For The Web

FIXES:
 - Adds new PXE ROM v6.3.0.
 - Split the ECC memory clearing during POST.
 - Fixes PPB problem when memory ranges covered by bridges are overlapped.
 
PREREQUISITES: N/A
 
HOW TO USE: 

1.  Download the SoftPaq to a directory on your hard drive. The file downloaded is a 
self-extracting executable with a filename based on the SoftPaq Number above.

2.  Refer to the remote utility documentation for instructions on creating a 
Remote ROM Flash job to flash the System ROM on target PCs on the network. 

WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE UPGRADE PROCESS!!!
 

Copyright (c) 2003 Hewlett-Packard Development Company, L.P.