TITLE: ROM Image for hp workstation xw6000 (686O4 ROM) VERSION: 1.14 Rev A DESCRIPTION: This SoftPaq contains a binary image for the System BIOS for the workstation models below with a 686O4 Family ROM. This SoftPaq is used to flash the System BIOS on target PCs on a network, and it requires System Software Manager (SSM) or Remote Management Setup. The ROM Family and ROM date can be determined by running the Setup Utility by pressing F10 on the target computer during system power on of the computer, and viewing File/System Information. This information can be saved into a text file by selecting File/Save to Diskette. NOTE: If you use Compaq System Software Manager (SSM) to deploy SoftPaqs within your organization, you must upgrade to SSM version 1.50 Rev. B or greater, which supports all new and existing SoftPaq formats. For information on SSM, check this site: http://www.compaq.com/im/change/ssmwp.html PURPOSE: Routine Release SOFTPAQ NUMBER: SP24586 SUPERSEDES: None EFFECTIVE DATE: June 16, 2003 CATEGORY: ROMPaq SSM SUPPORTED: Yes PRODUCT TYPE(S): Workstations PRODUCT MODEL(S): hp workstation xw6000 OPERATING SYSTEM(S): Microsoft Windows 2000 Microsoft Windows XP 32-bit Professional LANGUAGE(S): Global PREREQUISITES: System Software Manager (SSM) or Remote Management Setup HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. Refer to the remote utility documentation for instructions on creating a Remote ROM Flash job to flash the System ROM on target PCs on the network. WARNING: DO NOT TURN OFF POWER OR ATTEMPT TO REBOOT THE COMPUTER DURING THE UPGRADE PROCESS!!! Copyright (c) 2003 Hewlett-Packard Development Company, L.P.