TITLE: Adaptec 29320LP Driver for Windows 2000 VERSION: 1.30.0 Rev A DESCRIPTION: This contains the Windows 2000 driver for the Adaptec 29320LP controller in the workstation models listed below. PURPOSE: Routine Release SOFTPAQ NUMBER: SP24243 SUPERSEDES: None EFFECTIVE DATE: April 14, 2003 CATEGORY: Storage SSM SUPPORTED: No PRODUCT TYPE(S): Workstations PRODUCT MODEL(S): hp Workstation xw4100 OPERATING SYSTEM(S): Microsoft Windows 2000 LANGUAGE(S): Global PREREQUISITES: N/A HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number listed on at the top of this document. 2. Execute the downloaded file and follow the on-screen instructions. Please note the path where the SoftPaq contents will be extracted, the default is 'C:\SWSETUP\SP24243'. 3. After the files have been unpacked, you may delete the self-extracting file downloaded in step 1. 4. To update driver: - Open Device Manager (navigate Control Panel --> System --> Hardware --> Device Manager) - Click the '+' symbol for the 'SCSI and RAID controllers' entry - Highlight 'Adaptec SCSI Card 29320LP - Ultra320 SCSI' - Open the device properties, Action --> Properties - From the Drivers tab, update the driver using the path from step 2 5. Reboot the system if prompted. 6. After the installation is completed, you may delete the directory created in step 2 if you wish. Copyright (c) 2003 Hewlett-Packard Development Company, L.P.