SOFTPAQ NUMBER: SP23886 PART NUMBER: N/A FILE NAME: SP23886.EXE TITLE: Single Point Solution Systems ROMPaq Firmware Upgrade Diskette for ProLiant DL360 G3 Servers. VERSION: 03/19/2003 LANGUAGE: English CATEGORY: ROMPaqs DIVISIONS: Systems PRODUCTS AFFECTED: ProLiant DL360 G3 Servers OPERATING SYSTEM: ALL SYSTEM CONFIGURATION: N/A PREREQUISITES: N/A EFFECTIVE DATE: March 28, 2003 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 2.X SUPERSEDES: N/A DESCRIPTION: This release provides a Single Point Solution User ROMPaq diskette for the ProLiant DL360 G3 Servers. New Features - P31 ProLiant DL360 G3 system ROM (03/19/2003) ========================================================= None. Problems Fixed - P31 ProLiant DL360 G3 system ROM (03/19/2003) ========================================================= Addresses an issue where some DL360 G3 units could run the system fans at a higher speed than necessary. On some units, the fans could go to full speed during POST and the System Management driver would be unable to slow the fans regardless of the system temperature. Affected systems should set the System Maintenance Switch S3 (see documentation or hood labels) to off in order to bypass hardware fan control. Disabling hardware fan control will run the fans at full speed until the System Management driver is loaded, then the fans will slow to the appropriate speed. HOW TO USE: 1. Obtain a formatted 1.44 MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is SP23886.EXE. 3. From that drive and directory, execute the SoftPaq file: SP23886.EXE [ENTER] You will be prompted to place the formatted 1.44 MB diskette into a diskette drive to create diskette. 4. After the diskette is created, you may delete the downloaded file SP23886.EXE if you wish. Copyright 2003, Hewlett-Packard Company. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.