TITLE: Conexant HSFi V92 MiniPCI Modem Driver for Windows 98 SE

VERSION: 2.00 Rev D
DESCRIPTION:
This Softpaq contains the Windows 98 SE driver for the Conexant HSFi V92 MiniPCI Modem or
the Conexant Intl HSFi V92 MiniPCI Modem in the notebook models listed below.

PURPOSE: Routine Release
SOFTPAQ NUMBER: SP22986
SUPERSEDES: None
EFFECTIVE DATE: December 15, 2002
CATEGORY: Modem
SSM SUPPORTED: No

PRODUCT TYPE(S):
Notebooks
 
PRODUCT MODEL(S): 
Compaq Evo N610c

OPERATING SYSTEM(S): 
Microsoft Windows 98 SE
 
LANGUAGE(S): 
Global
 
ENHANCEMENTS: 
 - Includes support for Net Waiting / Modem On Hold when connected to a V.92
   server (see NOTE below about the Net Waiting V.92 feature).
 
PREREQUISITES: 
N/A
 
HOW TO USE: 

1. Download the SoftPaq to a directory on your hard drive and change to that directory.  
The file that is downloaded is a self-extracting executable with a filename based on the 
SoftPaq Number above.

2. From that drive and directory, execute the downloaded file and follow the on-screen 
instructions to unpack the files. The number of files to be created and total ile size 
is displayed. You will be given the chance to specify the target directory for the files, 
or default to the download directory.

3. After the files have been unpacked, you may delete the self-extracting file downloaded
in step 1.

4. The Softpaq will automatically upgrade the modem driver when it finishes unpacking files.
Follow the directions shown on the screen.

5. The system MUST be rebooted after the setup program runs for the modem to work properly.

Manual Installation:
=====================
If the modem driver is not automatically updated or if you want to manually update the 
modem driver, follow the instructions below:

1. The Softpaq will create the following directory structure in the directory
where it is unpacked.
\inst.bat
\modem
\NW

2. When the Softpaq finishes unpacking it will automatically install the modem drivers.  
If the user wants to do this manually in the future, the command "inst.bat" should be run. 
(This is the file the softpaq executes on exit). For example, use the task bar to select 
Start, then Run.
Enter:
(path)\inst2.bat
Select OK and follow on-screen instructions.  You MUST reboot the system after the setup 
program runs for the modem to work properly.

NOTE for the Net Waiting V.92 feature:  The install process will automatically update the 
Net Waiting software if an older version is already installed on the system.  If you do not 
have Net Waiting installed on your system and want to install the new version, go to the 
location where the softpaq unbundled the installation files and run SETUP.EXE (the Net 
Waiting setup program) located in the \NW directory.
 

Copyright (c) 2003 Hewlett-Packard Development Company, L.P. All Rights Reserved.

Compaq and the Compaq logo are trademarks of the Hewlett-Packard Company
in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective companies.