TITLE: Presario 2800/Evo N800 Keyboard Controller Firmware Update VERSION: 14.1F Rev A DESCRIPTION: DESCRIPTION: This SoftPaq creates a diskette for upgrading the Keyboard Controller BC Firmware (ROM) in Presario 2800 and Evo N800 Series notebooks. The KBC ROM interfaces directly with the hardware of the computer. PURPOSE: Routine Release SOFTPAQ NUMBER: SP22836 SUPERSEDES: SP22452 EFFECTIVE DATE: October 29, 2002 CATEGORY: ROMPaq SSM SUPPORTED: No PRODUCT TYPE(S): Notebooks PRODUCT MODEL(S): All Compaq Presario 2800 Series All Compaq Evo N800 Series OPERATING SYSTEM(S): OS Independent LANGUAGE(S): Global FIXES: - Fixes issue where Multiport failed when resuming from Standy/hibernation based on power sequence. PREREQUISITES: N/A HOW TO USE: 1. Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. From that drive and directory, execute the downloaded file and follow the on-screen instructions. Note: If you experience difficulty while creating the softpaq, please perform the following steps: a. Restart the system b. Press F8 right after the COMPAQ start up logo c. Select Safe Mode Option d. System will continue load windows in Safe Mode e. Execute the downloaded softpaq to create a bootable BIOS update diskette. 3. After the diskette has been created, you may delete the SoftPaq file downloaded in step 2. 4. Turn off the computer. 5. Place the newly created Compaq Presario 2800/EvoN800 Series ROMPaq Diskette in Drive A: and turn on the computer. IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS PROCEDURE! Copyright (c) 2002, Hewlett-Packard Company. All Rights Reserved. Compaq and the Compaq logo are trademarks of the Hewlett-Packard Company in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respectiventioned herein may be trademarks of their respective companies.