TITLE: ROM Image for Presario 2810 Evo N800w (68P4W) Remote ROM Flash

VERSION: F.07 Rev A
DESCRIPTION:
This SoftPaq creates files that contain a binary image for the System ROM for
the Presario/Evo models listed below with a 68P4W Family ROM. This SoftPaq is
used to flash the System ROM on target PCs on a network, and it requires
System Software Manager (SSM) or Remote Management Setup. The ROM Family and
ROM date can be determined by running the Setup Utility by pressing F10 on the
target computer during system power on of the computer, and viewing
File/System Information.

PURPOSE: Recommended Update
SOFTPAQ NUMBER: SP22830
SUPERSEDES: SP22596
EFFECTIVE DATE: October 29, 2002
CATEGORY: ROMPaq
SSM SUPPORTED: Yes

PRODUCT TYPE(S):
Notebooks
 
PRODUCT MODEL(S): 
Compaq Evo N800w
Compaq Presario 2810

OPERATING SYSTEM(S): 
OS Independent
 
LANGUAGE(S): 
Global

FIXES: 
 - Fixes issue where booting with a hard drive in the multibay and Multiboot enabled 
   caused the time to be reset to 3 minutes after the current hour.
 
PREREQUISITES: 
N/A
 
HOW TO USE: 

1. Download the SoftPaq to a temporary, empty directory on your hard drive. The
file downloaded is a self-extracting executable with a filename based on the
SoftPaq Number above.

2. The BIOS/ROM image file must be used with Remote Management Software in
order to actually flash (upgrade) the ROM image on one of the affected
Presario/Evo
notebooks.

3. When used with SSM, copy the SoftPaq to the file store.

4. When used with WINFLASH, run the SoftPaq to get the .cab file.

IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS
PROCEDURE!
 
Copyright (c) 2002, Hewlett-Packard Company. All Rights Reserved.
Compaq and the Compaq logo are trademarks of the Hewlett-Packard Company
in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective
companies.