TITLE: ROM Image for Evo N400c (686AW) Remote ROM Flash

VERSION: 2002.09.23 Rev A
DESCRIPTION:
This SoftPaq creates files that contain a binary image for the System ROM for
the Evo models listed below with a 686AW Family ROM. This SoftPaq is used to
flash the System ROM on target PCs on a network, and it requires System
Software Manager (SSM) or Remote Management Setup. The ROM Family and ROM date
can be determined by running the Setup Utility by pressing F10 on the target
computer during system power on of the computer, and viewing File/System
Information.

PURPOSE: Recommended Update
SOFTPAQ NUMBER: SP22780
SUPERSEDES: SP21255
EFFECTIVE DATE: October 21, 2002
CATEGORY: ROMPaq
SSM SUPPORTED: Yes

PRODUCT TYPE(S):
Notebooks
 
PRODUCT MODEL(S): 
Evo N400c Series

OPERATING SYSTEM(S): 
OS Independent
 
LANGUAGE(S): 
Global
 
FIXES: 
 - Corrects issue of regenerating a different UUID (Universally Unique Identification) 
   number every time the computer is restarted. 
 - Fixes issue where F10 Setup shows USB LS-120 where it should show USB SuperDisk drive.
 
PREREQUISITES: 
Compaq System Software Manager
 
HOW TO USE: 

1. Download the SoftPaq to a temporary, empty directory on your hard drive. The
file downloaded is a self-extracting executable with a filename based on the
SoftPaq Number above.

2. The BIOS/ROM image file must be used with Remote Management Software in
order to actually flash (upgrade) the ROM image on one of the affected Evo
notebooks.

3. When used with SSM, copy the SoftPaq to the file store.

4. When used with WINFLASH, run the SoftPaq to get the .cab file.

IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS
PROCEDURE!
 
 
Copyright (c) 2002, Hewlett-Packard Company. All Rights Reserved.
Compaq and the Compaq logo are trademarks of the Hewlett-Packard Company
in the U.S. and other countries.
All other product names mentioned herein may be trademarks of their respective