TITLE: ROM Image for Presario 2810 and Evo N800w (68P4W) Remote ROM Flash VERSION: F.06 Rev A DESCRIPTION: This SoftPaq creates files that contain a binary image for the System ROM for the Presario/Evo models listed below with a 68P4W Family ROM. This SoftPaq is used to flash the System ROM on target PCs on a network, and it requires System Software Manager (SSM) or Remote Management Setup. The ROM Family and ROM date can be determined by running the Setup Utility by pressing F10 on the target computer during system power on of the computer, and viewing File/System Information. PURPOSE: Recommended Update SOFTPAQ NUMBER: SP22596 SUPERSEDES: None EFFECTIVE DATE: October 7, 2002 CATEGORY: ROMPaq SSM SUPPORTED: Yes PRODUCT TYPE(S): Notebooks PRODUCT MODEL(S): Compaq Evo N800w Compaq Presario 2810 OPERATING SYSTEM(S): OS Independent LANGUAGE(S): Global PREREQUISITES: N/A HOW TO USE: 1. Download the SoftPaq to a temporary, empty directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number above. 2. The BIOS/ROM image file must be used with Remote Management Software in order to actually flash (upgrade) the ROM image on one of the affected Presario/Evo notebooks. 3. When used with SSM, copy the SoftPaq to the file store. 4. When used with WINFLASH, run the SoftPaq to get the .cab file. IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS PROCEDURE! Copyright (c) 2002 Compaq Information Technologies Group, L.P. Compaq and the Compaq logo are trademarks of Compaq Information Technologies Group, L.P. in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies.