SOFTPAQ NUMBER: SP21854 PART NUMBER: N/A FILE NAME: N/A TITLE: Compaq Management Agents for OS/2 VERSION: 4.10 LANGUAGE: English CATEGORY: Software Solutions DIVISIONS: Systems PRODUCTS AFFECTED: All Compaq Servers running Compaq Management Agents for OS/2 v4.10 OPERATING SYSTEM: 1. IBM OS/2 Warp Server for e-business v4.50 2. Convenience Package for IBM OS/2 Warp Server for e-business v4.52 SYSTEM CONFIGURATION: N/A EFFECTIVE DATE: September 25, 2002 ELECTRONIC DISTRIBUTION ALLOWED: YES SUPERSEDES: SP19857 DESCRIPTION: This SoftPaq creates three diskettes for the Compaq Management Agents for OS/2, v4.10. These diskettes contain all of the agents for OS/2. For details on enhancements to the agents and installation, refer to the README.TXT on the generated diskette. Supported Products: The Compaq Management Agents for OS/2 have been tested on the following Compaq Products: Compaq ProLiant family of servers Enhancements and Fixes: Support for the following Compaq Server ProLiant ML 570 G2 UPDATES: None HOW TO USE: 1. Download the Softpaq to an empty directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above i.e SP21854.EXE. 2. From that drive and directory, execute the downloaded Softpaq file. The following files should be created: QRST5.EXE CMA410._01 CMA410._02 CMA410._03 SP21854.TXT 3. Obtain three formatted 1.44 MB diskettes. 4. Run the QRST5.EXE and follow the on-screen instructions. 5. After the diskettes are created, you may delete the downloaded file (SP21854.EXE) and the other files created on your hard drive in step 1. 6. To install the Compaq Management Agents for OS/2, Insert the first diskette. Run a:\install and follow the on-screen instruction. 7. TCP/IP Installation Screen will be executed during the process of Agents installation if TCP/IP modules are not installed in the system. 8. Select SNMP Networking Kit. Change the default path to :\TCPIP. Click on 'Install'. Installation will continue. 9. Configure the SNMP Settings in TCP/IP Configuration Screen. SYSCONTACT - specifies a contact person for the server. SYSLOCATION - specifies the physical location of the server. Note: The Management Agents set both of these variables to the default value of "." during installation. Configure SNMP Manager Access Authorization and Trap destination in Page 2 of this screen. 10. To exit, select close from the system-icon pull down menu. At the prompt select to save or discard the changes. 11. Agents installation will continue. Remove the diskette when installation is complete. 12. Reboot the server. Note: Refer to README.TXT on the diskette for installation instructions and additional information. Copyright 2002 Compaq Information Technologies Group, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.