SOFTPAQ NUMBER:  SP21850
PART NUMBER:  N/A
FILE NAME:  N/A
TITLE:  Compaq Lights-Out Configuration Utility
VERSION:  2.10 Rev A
LANGUAGE:  English

CATEGORY:  Software Solutions 

DIVISIONS:  Systems

PRODUCTS AFFECTED:  Compaq servers with the Remote Insight Lights-Out Edition II (RILOE II) adapter 
		       installed or Integrated Lights-Out (iLO) embedded.
                    
OPERATING SYSTEM:  Microsoft Windows 95/98
Microsoft Windows NT 4.0
Microsoft Windows 2000
Microsoft Windows XP
 
SYSTEM CONFIGURATION:  N/A

PREREQUISITES: This utility requires the following minimum firmware revisions:
		Remote Insight Lights-Out Edition II firmware 1.02
		Integrated Lights-Out firmware 1.15
Currently,  Remote Insight Lights-Out Edition adapter is supported by Compaq Lights-Out Configuration
Utility version 1.21.

EFFECTIVE DATE:  September 11, 2002

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  4.x

SUPERSEDES:  SP19825

DESCRIPTION:  Contains the Compaq Lights-Out Configuration Utility (CPQLOCFG.EXE).  This utility 
supports Remote Insight Lights-Out Edition II (RILOE II) and Integrated Lights-Out (iLO) devices.  
CPQLOCFG is used as a scripting tool to configure/adminster groups of deployed RILOE II and iLO devices. 

Group administration simplifies an IT administrator's task of remotely configuring and managing using XML scripts. 
Using the Compaq Lights-Out Configuration Utility, an administrator can easily configure user accounts, network 
and global settings for a group of management processors, rather than one at a time. This can be performed in a 
batch process or by using Insight Manager 7’s device query mechanism. 

Group actions on one or many servers including power on/off, power cycle, ROM upgrades, and even remote 
deployment of servers are also supported by CPQLOCFG.

This version of the utility does not support the original Remote Insight Lights-Out Edition board.  Version 1.2 of 
CPQLOCFG (SP17827) should be used for the original RILOE.”

Enhancements/Fixes:
1) Enhanced error reporting.
2) Allow user to specify SSL port number; default :443 

HOW TO USE:
1. Create a directory on your hard-drive.
2. Copy this SoftPaq to this directory.
3. From this new directory, run SoftPaq to extract the necessary files.
4. See the RIBCL scripting guidelines in the RILOE II and iLO User Guides

Copyright 2002, Compaq Computer Corporation.  All rights reserved.

Product names mentioned herein may be trademarks and/or registered 
trademarks of their respective companies