SOFTPAQ NUMBER: SP21834 PART NUMBER: N/A FILE NAME: N/A TITLE: BIOS upgrade for the 64-Bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter P/N 154457-B21 VERSION: 3.02.2 LANGUAGE: English CATEGORY: Storage DIVISIONS: Storage Product Division PRODUCTS AFFECTED: ProLiant 1600, ProLiant 1850R, ProLiant 3000, ProLiant 6400R, ProLiant 5500, ProLiant 7000, ProLiant 8000, ProLiant DL360, ProLiant DL380, ProLiant ML350, ProLiant ML370, ProLiant ML570, OPERATING SYSTEM: All SYSTEM CONFIGURATION: Industry Standard Servers PREREQUISITES: N/A EFFECTIVE DATE: Sept 5, 2002 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: 5.0 SUPERSEDES: N/A Enhancements/Fixes: 1. Get Drive Parameters returns numbers of diskette drives installed is 0. (DL=0) 2. Presents a POST-time selection for multi-initiator using F8. 3. Adds functionality to report the firmware version to CIM. 4. Changed banner from Compaq to HP. DESCRIPTION: This SoftPaq contains the BIOS upgrade for the 64-Bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter P/N 154457-B21. This BIOS upgrade is required if this adapter is used in a Compaq server to support Compaq DRTape. NOTE: The DRTape feature is supported only on the following systems with the corresponding listed BIOS Code Levels, and the date of the BIOS code must be the same date or newer than the date listed: Server Type BIOS Code Level Date PL 8000 P41 12/27/1999 PL 7000 (Xeon) P40/P43 12/27/1999 PL 6400R P11 12/10/1999 PL 5500 (Xeon) P12 12/10/1999 PL 3000 P19 12/22/1999 PL 1850R P07 12/10/1999 PL 1600 (Pentium II) P08 12/10/1999 DL 380 P17 12/10/1999 DL 360 P21 12/23/1999 ML 570 P20 08/24/2000 ML 370 P17 12/10/1999 ML 350 D02/F02 06/02/2000 HOW TO USE: !!! WARNING !!! !!! PLEASE READ !!! !!! WARNING !!! DO NOT run this program from a hard disk. DO NOT run this program from a DOS Window, or a DOS Shell. DO NOT run this program in 32-bit mode, from NT. Do NOT run this program with EMM386.exe active. !!! WARNING !!! !!! PLEASE READ !!! !!! WARNING !!! CAUTION: This BIOS update is NOT to be used for updating motherboard embedded SCSI controllers or other OEM adapters. WARNING: Using this utility for Adaptec retail adapters, designed-in controller chips, or other OEM adapters may render those Adapters UNUSABLE. Files included with this download: README.TXT This text file with additional information. UPDATE.BAT Batch file for the Flash BIOS Update process. xxxxxx.ROM BIOS ROM image to used by Update.bat SCSIUL.EXE Program used to post the xxxxxx.ROM image to the SCSI host adapter. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive. The SoftPaq file that is downloaded is a self-extracting executable with a file name based on the SoftPaq Number above. 2. Execute the downloaded file and follow the on-screen instructions. Press the Space Bar to confirm the unpacking of files into the download directory. 3. After the files have been unpacked, you may delete the self-extracting SoftPaq file downloaded in step 1. 4. DO NOT run this program from a hard disk, a DOS Window, a DOS Shell, in NT 32-bit mode, or with EMM386.exe active. 5. Copy the expanded files to a bootable DOS floppy diskette. Boot your system from the DOS bootable floppy diskette. Type ' UPDATE ' from the ' A:\ ' DOS prompt. 6. After the installation is completed, you may delete the files unpacked in step 2. Copyright 2002, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies STATUS CODE LISTINGS: UPON COMPLETTION: When the program finishes it will exit and then return one of Status Codes listed below: Status Meaning Code 0 = Program ran successfully. 1 = Command line syntax error. a.) Possible Cause is an Invalid option at the command line. 2 = Invalid parameter following the argument. 3 = File System error. a.) Can not open BIOS image file. b.) Cannot read from / write to the specified file. 4 = Invalid BIOS image file. a.) BIOS image size may be incorrect. We assume 64k or 128k BIOS image size. b.) BIOS signature (55AA as first two bytes) may be incorrect. 5 = Unable to determine PCI BIOS support. a.) The underlying hardware may not be supporting PCI interface. 6 = Memory allocation error. Unable to allocate sufficient memory. 7 = Expansion ROM is not present. a.) The adapter card doesn't have an expansion ROM. b.) Expansion ROM is not supported. 8 = Verification failed. Unable to verify the expansion ROM image. 9 = Unable to read or write the configuration registers. a.) Probable cause may be a problem with a PCI BIOS interrupt. 10 = Device not existent. a.) Cannot locate any Adaptec device. b.) No Adaptec SCSI devices are present on the PCI bus. 11 = File System write error. Insufficient disk space. 12 = Unable to flash any of the host adapters. 13 = Unable to flash some of the host adapters. 14 = Unable to retrieve information for BIOS version less than 2.20.0. *********************************************************************** WARNING: USING THE SCSIUL.EXE PROGRAM MANUALLY, WITHOUT THE BATCH FILES PROVIDED CAN RENDER YOUR CONTROLLER INOPERABLE. The SCSIUL.EXE program contains optional switches for a large number of controllers. Some switches, especially the -1mb is reserved for a select group of controllers and must NOT BE USED. ***********************************************************************