SOFTPAQ NUMBER:  SP21828
PART NUMBER:
FILE NAME:  N/A
TITLE:  TxtSetup Support for USB Floppy/Mass Storage Devices
VERSION:  1.4.2195.0
LANGUAGE:  English

CATEGORY:  Drivers

DIVISIONS: Systems

PRODUCTS AFFECTED:  
ProLiant BL10e, ProLiant DL360 G2, ProLiant DL380 G3, ProLiant DL580 G2, 
ProLiant ML310, ProLiant ML350 G3, ProLiant ML370 G3, ProLiant ML530 G2, 
ProLiant ML570 G2, and any server shipped after July 2002.

OPERATING SYSTEM:  Windows 2000

SYSTEM CONFIGURATION:  N/A

PREREQUISITES: N/A

EFFECTIVE DATE:  Immediate

ELECTRONIC DISTRIBUTION ALLOWED:  Yes

SOFTPAQ UTILITY VERSION:  5.1

SUPERSEDES:  N/A

DESCRIPTION:
This diskette will provide USB floppy/mass storage support for ProLiant 
servers during the TxtSetup phase of installation.  To enable USB mass 
storage during installation, use this disk during by pressing F6 during the 
initial setup screen.

HOW TO USE:

To use this utility disk, you will need to following:
- A BIOS that can boot from a USB CD/Floppy (see supported servers above).
- A USB CD and/or USB Floppy

Do the following:
- Download this softpaq.
- Execute this softpaq to extract its contents to a blank floppy disk.
- Label the disk "TxtSetup USB Driver Disk".
- Boot your system with an attached USB CD or floppy.
- Press F6 when prompted (for additional SCSI or Raid drivers).
- Press 'S' when prompted.
- Insert TxtSetup USB Driver Disk when prompted and press enter.
- Select your USB CD from the list and press enter.
- If you have other USB devices, such as a USB Floppy to use a driver disk,
    then press 'S' again and select them as well.  You can continue choosing
    as many devices as you have attached.  They will appear as a continued 
    list of selected devices.  Take additional selections are available by
    using the up and down arrows.
- Press enter after you have made all your selections.
- Setup will continue as usual.

If the devices attached are supported you should progress without trouble 
to the End-User License Agreement and beyond. If the devices are not 
supported or the wrong device is attached, you will get a bugcheck of 
BOOT_DEVICE_INACCESSABLE.  You cannot continue from this exception.

Tested devices include:
USB TEAC CD-Rom (CD-210PU) => "Generic USB CD Device"
USB TEAC Floppy (FD-05PUB) => "TEAC USB Floppy"

Copyright 2002 Hewlett-Packard Company.  All Rights Reserved.

Product names mentioned herein may be trademarks and/or registered
trademarks of their respective companies.