SOFTPAQ NUMBER: SP21812 PART NUMBER: N/A FILE NAME: rhAdvServ2.1-megaide-2.25c.img TITLE: Driver Update Disk for installation of RedHat 2.1 Advanced Server for ML 310 (ATA Version) VERSION: 2.25c LANGUAGE: English CATEGORY: Storage Controllers DIVISIONS: Systems PRODUCTS AFFECTED: ML 310 -- ATA Version OPERATING SYSTEM: RedHat 2.1 Advanced Server SYSTEM CONFIGURATION: ATA Version Only PREREQUISITES: N/A EFFECTIVE DATE: September 17, 2002 ELECTRONIC DISTRIBUTION ALLOWED: Yes SOFTPAQ UTILITY VERSION: Version 5.x SUPERSEDES: N/A DESCRIPTION: Provides a driver update disk image for use when installing RedHat 2.1 Advanced Server on the ATA Version of the ML 310. The user will need to follow the instructions included below. To complete this procedure, one formatted floppy and either a UNIX/Linux or Win95/98 capable machine (with rawrite available) will be required. Enhancements/Fixes: N/A. HOW TO USE: 1. Download the SoftPaq to a directory on your hard drive and change to that directory. 2. From that drive and directory, type tar -zxvf sp21812.tgz to extract the downloaded file. The IMG file will be created in the current directory. 3. After the IMG file is extracted, you may delete the SoftPaq file downloaded in step 1. 4. Refer to the installation instructions below for how to install the driver. INSTALLATION INSTRUCTIONS: 1. Create the installation diskette – This will require either a Microsoft Windows 95/98 (with the rawrite utility available)or a UNIX based OS machine and a formatted floppy 1.1. Win 95/98: 1.1.1. Ensure that both RAWRITE and the .img file (rhAdvServ2.1-megaide-2.25c.img) are located in the same directory. 1.1.2. To create the Driver Update Disk: 1.1.2.1. Type: rawrite 1.1.2.2. You will prompted to enter the name of the boot image file. Enter the file name (rhAdvServ2.1-megaide-2.25c.img) and hit . 1.1.2.3. You will next be prompted for the destination of the file. Assuming that your floppy drive is A, type A and hit 1.1.2.4. When the process completes, the command prompt will return and the disk creation is complete. Label this disk “DUD_Megaide”. 1.1.3. Continue with step 2.1. 1.2. UNIX 1.2.1. To create the Driver Update Disk: 1.2.1.1. Use the following command to create the driver update floppy: # dd if=rhAdvServ2.1-megaide-2.25c.img of=/dev/fd0 1.2.1.2. When the process completes, the command prompt will return and the disk creation is complete. Label this disk “DUD_Megaide”. 1.2.2. Continue with step 2.1. 2. Installing RH 2.1 Advanced Server with the ML 310 as the primary boot controller: 2.1. Start by erasing the system. This step ensures that you begin the installation process from a known non-configured state. 2.1.1. Boot from the SmartStart CD-ROM. 2.1.2. Select Run System Erase Utility from the Main Menu --> Yes. 2.1.3. Restart the server. 2.2. During POST, invoke the feature and enter the Integrated ATA RAID Configuration Utility. Please refer to the ML 310 System Installation Guide for details on configuration of Arrays. Save your changes and exit the Integrated RAID Configuration Utility. The system will reboot. Note: If this step is skipped, then all drives will be defaulted to RAID 0. 2.3. In RBSU, change the boot sequence so that the first boot device is the ATA RAID controller and the second boot device is the CDROM. 2.4. Boot your system using the RedHat 2.1 Advanced Server OS Installation Disk 1. 2.5. At the boot prompt, type "Linux dd" 2.6. Insert the Driver Update Diskette (DUD_Megaide) that you created in step 1.0 2.7. Select “Yes” when asked for “Do you have a driver disk?” 2.8. Select yes again and it will flash a message saying “loading megaide” 2.9. Press Ctrl+Alt+F4 to switch to a different terminal and check to see if the correct driver version is loaded. 2.10. Press Ctrl+Alt+F1 to switch back to the installation screen. 2.11. Continue with installation instructions specified by the installation guide supplied with Redhat 2.1 Advanced Server. 3. Installing Redhat 2.1 Advanced Server with ATA RAID as the secondary controller: NOTE: Ensure that the ATA RAID Management Utility is not loaded prior to the complete installation of the MegaIDE driver and partitioning of the Integrated ATA RAID volumes. 3.1. Install RedHat 2.1 Advanced Server OS onto primary controller. 3.2. During POST, invoke the feature and enter the Integrated ATA RAID Configuration Utility. Please refer to the ML 310 System Installation Guide for details on configuration of Arrays. Save your changes and exit the Integrated RAID Configuration Utility. The system will reboot. Note: If this step is skipped, then all drives will be defaulted to RAID 0. 3.3. Continue to boot your system using primary controller. 3.4. Mount the Driver Update Diskette (DUD_Megaide) that you created in step 1.0: /mnt/floppy 3.5. Copy /mnt/floppy/modules.cgz to /root 3.6. Unzip modules.cgz with the following command -- gunzip –S .cgz modules This will give you a file called modules. 3.7. Type cpio –idv < modules This will create several directories within /root 3.8. Type uname –a to determine kernel type. 3.9. Change to the directory listed as a result of the previous step – if kernel type is 2.4.6smp, then cd /root/2.4.6smp 3.10. There will be a file called megaide.o. Type insmod megaide.o to load the driver. (Note-you may copy megaide.o to /lib/modules/* and create a new ramdisk image if needed, where * is the kernel type.) Copyright 2002, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.