TITLE: System BIOS/ROM for Evo D310 Microdesktop VERSION: JH0104 DESCRIPTION: This SoftPaq creates a firmware diskette that can be used to locally restore or upgrade the System ROM in the Evo Models listed below. To check the BIOS version currently installed: at the start of boot, when the HP logo is displayed, press F8 to enter Configuration & Diagnostics, then press F2 to enter BIOS Setup. The BIOS version number is displayed in the main menu. NOTE: This is the same System ROM version that was originally included on the above models. It is not an upgrade. It is made available here as a convenience for users who may need to restore it to their computer for any reason. PURPOSE: Routine Release SOFTPAQ NUMBER: SP21660 SUPERSEDES: SP21508 EFFECTIVE DATE: July 8, 2002 CATEGORY: ROMPaqs/BIOS and Firmware SSM SUPPORTED: No PRODUCT TYPE(S): Desktops PRODUCT MODEL(S): Evo D310 Microdesktop: All Models OPERATING SYSTEM(S): Microsoft Windows NT 4.0 Microsoft Windows Windows 2000 Microsoft Windows XP Home Microsoft Windows XP Professional LANGUAGE(S): Global ENHANCEMENTS: - Fine-tunes the delay time to resume from S3 sleep state. PREREQUISITES: N/A HOW TO USE 1. Download the SoftPaq to a directory on your hard drive. The file downloaded is a self-extracting executable with a filename based on the SoftPaq Number listed on at the top of this document. 2. Execute the downloaded file and follow the on-screen instructions. 3. For installation instruction, please see the WHATSNEW.DOC file in the location where the filew were extracted. 4. After the installation is completed, you may delete the downloaded file and the directory created in step 2 if you wish. Copyright (c) 2002 Compaq Information Technologies Group, L.P. Compaq and the Compaq logo are trademarks of Compaq Information Technologies Group, L.P. in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies.