TITLE: ROMpaq for Presario 2800/Evo N800 (68P4M ROM) VERSION: F.09 Rev A DESCRIPTION: This SoftPaq creates a ROMPaq firmware diskette that can be used to locally restore or upgrade the System ROM in the Presario/Evo models listed below with a 68P4M Family ROM. The ROM Family and ROM date can be determined by running the Setup Utility by pressing F10 on the target computer during system power on of the computer, and viewing File/System Information. PURPOSE: Routine Release SOFTPAQ NUMBER: SP21352 SUPERSEDES: SP21203 EFFECTIVE DATE: June 4, 2002 CATEGORY: ROMPaq SSM SUPPORTED: No PRODUCT TYPE(S): Notebooks PRODUCT MODEL(S): Compaq Evo N800 Compaq Presario 2800 OPERATING SYSTEM(S): OS Independent LANGUAGE(S): Global FIXES: - Fixes issue where OS would display a "Nonsystem disk" error on restart after enabling wake from USB devices. PREREQUISITES: N/A HOW TO USE: 1. Obtain a formatted 1.44-MB diskette. 2. Download the SoftPaq to a directory on your hard drive and change to that directory. The file that is downloaded is an executable with a filename based on the SoftPaq Number above. 3. From that drive and directory, execute the downloaded file and follow the on-screen instructions. You will be prompted to insert the formatted diskette in a drive to create the diskette. 4. After the diskette has been created, you may delete the SoftPaq file downloaded in step 2. 5. Turn off the computer. 6. Place the newly created Compaq Presario 2800/Evo N800c/Evo N800v ROMPaq Diskette in Drive A: and turn on the computer. Follow the instructions on the screen to upgrade the System ROM. IMPORTANT: DO NOT TURN OFF POWER TO THE COMPUTER WHILE PERFORMING THIS PROCEDURE! Copyright (c) 2002 Compaq Information Technologies Group, L.P. Compaq and the Compaq logo are trademarks of Compaq Information Technologies Group, L.P. in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies.