SOFTPAQ NUMBER: SP2410 PART NUMBER: 275661-001, 275662-001, 275663-001 FILE NAME: N/A TITLE: Options ROMPaq VERSION: 2.33 Rev A LANGUAGE: English CATEGORY: ROMPaqs EFFECTIVE DATE: 8 April 1997 PRODUCTS AFFECTED: Systems Updated: o ProSignia, ProSignia VS, ProSignia 300, ProSignia 500 o Proliant 1000, Proliant 1500, Proliant 2000/4000/4500/5000, Rack-Mountable Proliant Servers o Systempro, Systempro/e, Systempro/LT, Systempro/XL Options Affected: o Compaq SMART Controller o Compaq SMART-2 Controllers o Compaq SCSI Drives on the SMART Controller o Compaq SCSI Drives on the Fast-SCSI-2 (C710) Controller o Compaq DAT Drives on the Fast-SCSI-2 (C710) Controller OPERATING SYSTEM: N/A SYSTEM CONFIGURATION: N/A SUPERSEDES: SP2378 DESCRIPTION: The Options ROMPaq diskettes allow a user to upgrade the ROM Firmware images for Compaq System product Options. The Options ROMPaq consists of 3 diskettes: Disk 1 - Options ROMpaq Firmware Upgrade Diskette for the Compaq SMART SCSI Array Controllers and Compaq Hard Drives Disk 2 - Options ROMpaq Firmware Upgrade Diskette for Additional Compaq Hard Drives Disk 3 - Options ROMpaq Firmware Upgrade Diskette for the Compaq SCSI DAT drives and SCSI tape Drives Enhancements/Fixes: - Added firmware image 1.48 for SMART-2 Controller - Removed firmware image 1.36 for SMART-2 Contoller NOTE: Firmware below preceded by an "*" is not included in the .INF files due to space limitations in the systems partition. CONTROLLER FIRMWARE =================== SMART Controller version 2.26 SMART-2 Controller version 1.48 HARD DRIVES =========== version 3C31 - model 0662S12 [1GB] SCSI drives. * version 75909364 - models ST3400A [340MB] and ST3600A [510 MB] IDE drives. version 442C - model DSP3053LS [535 MB] SCSI drives. version 3223 - model ST12550A [2GB] SCSI drives. Note: Version 3223 firmware enables read-lookahead on model ST12550N drives. version 6416 - model ST32550W [2GB] wide SCSI drives. version 6216 - model ST15150W [4GB] wide SCSI drives. * version 15E6 - model 2105 [550MB] and 2112 [1GB] SCSI drives. version 5193 - model C2490A [2GB] SCSI drives. * version 4141 - models DFHSS2W, DFHSS2F,DFHSS4W, DFHSS4F drives. version 6527 - model M1606S [1GB] SCSI drives. * version 0BX4 - model C2244 [550MB] and C2247 [1GB] SCSI drives. * version 6317 - model ST32550N [2GB] SCSI drives. * version 5217 - model ST15150N [4GB] SCSI drives. * version L915 - model XP34300W [4GB] & XP32150W [2GB] SCSI drives. TAPE DRIVES =========== version 1214 - 2/8GB TurboDAT version 4C08 - 2/8 & 4/16GB TurboDAT version 5.98 - 4/16GB TurboDAT version 4C04 - AutoLoader version 5.94 - AutoLoader NOTE: Multiple firmware versions exist for these products. This ROMpaq utility will identify and upgrade the correct firmware to the specific OEM tape hardware product. HOW TO USE: 1. Download the SoftPaq a directory on your hard drive and change to that directory. The file downloaded to your hard drive is SP2410.EXE. 2. Obtain three (3) formatted 1.44MB diskettes and place one of them in your diskette drive. 3. Execute the SoftPaq file: SP2410 [ENTER] Disk 1 - Options ROMpaq Firmware Upgrade Diskette for the Compaq SMART SCSI Array Controllers and Compaq Hard Drives Disk 2 - Options ROMpaq Firmware Upgrade Diskette for Additional Compaq Hard Drives Disk 3 - Options ROMpaq Firmware Upgrade Diskette for the Compaq SCSI DAT drives and SCSI tape Drives 4. After the diskettes are created, you may delete the downloaded file SP2410.EXE if you wish. 5. The Options ROMPaq diskettes are self booting diskettes. Place each ROMPaq diskette into your drive A: diskette drive and power cycle your system to begin updating the appropriate components. Copyright 1997, Compaq Computer Corporation. All rights reserved. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.